HardLabs

IN16 optoToMySensors

LudovicLemarinel·KicadDomo·IN16_optoToMySensors/IN16_optoToMySensors.kicad_pcb

IN16 optoToMySensors PCB layout, top view — open source AVR/Arduino board by LudovicLemarinel

About the IN16 optoToMySensors PCB

IN16 optoToMySensors is an open source AVR/Arduino PCB design by LudovicLemarinel, published on GitHub. It is a board measuring 50 × 50 mm, with 11 components from 8 distinct parts.

Its main chip is the ATMEGA328-A, from the AVR/Arduino family. Other key parts include the AMS1117. By type, the board carries 3 connectors, 2 resistors, 1 IC and 1 capacitor.

Main components on the IN16 optoToMySensors

AMS1117

IN16 optoToMySensors bill of materials (BOM)

11 components, 8 distinct parts.

QtyPartRefs
1
AMS1117
U4
2
CONN_10
P0, P1
1
5VIN
P3
2
74LS151
74LS151, 74Ls151
1
ATMEGA328-A
328p
1
RFM69HW
RFM69HW
1
10uF
C1
2
RN10K
RN1, RN2

IN16 optoToMySensors design files

The KiCad project lives in the LudovicLemarinel/KicadDomo repository on GitHub; these links point at the commit this page was built from.

IN16 optoToMySensors: common questions

What microcontroller does the IN16 optoToMySensors use?

The IN16 optoToMySensors is built around the ATMEGA328-A, from the AVR/Arduino family.

How big is the IN16 optoToMySensors PCB?

The IN16 optoToMySensors measures 50 × 50 mm and is 1.6002 mm thick.

How many components are on the IN16 optoToMySensors?

11 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the IN16 optoToMySensors design files?

From the LudovicLemarinel/KicadDomo repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the IN16 optoToMySensors design in my own project?

The repository has no license, so all rights stay with LudovicLemarinel. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the IN16 optoToMySensors without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in KicadDomo

Similar boards