HardLabs

MySensors FilPilote RFM69

LudovicLemarinel·KicadDomo·mySensors_FilPilote/mySensors_FilPilote_RFM69.kicad_pcb

MySensors FilPilote RFM69 PCB layout, top view — open source AVR/Arduino board by LudovicLemarinel

About the MySensors FilPilote RFM69 PCB

MySensors FilPilote RFM69 is an open source AVR/Arduino PCB design by LudovicLemarinel, published on GitHub. It is a 2-layer board measuring 47.5 × 49 mm, with 14 components from 11 distinct parts.

Its main chip is the ATMEGA328-A, from the AVR/Arduino family. Other key parts include the MOC3041M, AMS1117, RFM69HW and HLK-PM01. By type, the board carries 6 ICs, 3 connectors, 2 diodes, 2 resistors and 1 capacitor.

Main components on the MySensors FilPilote RFM69

ATMEGA328-AMOC3041MAMS1117RFM69HWHLK-PM01

MySensors FilPilote RFM69 bill of materials (BOM)

14 components, 11 distinct parts.

QtyPartRefs
1
ATMEGA328-A
IC1
2
MOC3041M
U1, U2
1
AMS1117
U3
1
RFM69HW
U4
1
HLK-PM01
U5
1
CONN_01X03
P1
1
ICSP
P2
1
ANT
P3
2
D
D1, D2
1
10u
C3
2
220
R1, R2

MySensors FilPilote RFM69 design files

The KiCad project lives in the LudovicLemarinel/KicadDomo repository on GitHub; these links point at the commit this page was built from.

MySensors FilPilote RFM69: common questions

What microcontroller does the MySensors FilPilote RFM69 use?

The MySensors FilPilote RFM69 is built around the ATMEGA328-A, from the AVR/Arduino family.

How big is the MySensors FilPilote RFM69 PCB?

The MySensors FilPilote RFM69 measures 47.5 × 49 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MySensors FilPilote RFM69?

14 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the MySensors FilPilote RFM69 design files?

From the LudovicLemarinel/KicadDomo repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the MySensors FilPilote RFM69 design in my own project?

The repository has no license, so all rights stay with LudovicLemarinel. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MySensors FilPilote RFM69 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in KicadDomo

Similar boards