HardLabs

MySensors FilPilote nrf24

LudovicLemarinel·KicadDomo·mySensors_FilPilote/mySensors_FilPilote_nrf24.kicad_pcb

MySensors FilPilote nrf24 PCB layout, top view — open source AVR/Arduino board by LudovicLemarinel

About the MySensors FilPilote nrf24 PCB

MySensors FilPilote nrf24 is an open source AVR/Arduino PCB design by LudovicLemarinel, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 15 components from 11 distinct parts.

Its main chip is the ATMEGA328P_Arduino, from the AVR/Arduino family. Other key parts include the MOC3041M, LD1117V33, NRF24L01+ and HLK-PM01. By type, the board carries 6 ICs, 3 capacitors, 2 diodes, 2 resistors, 1 crystal and 1 connector.

Main components on the MySensors FilPilote nrf24

ATMEGA328P_ArduinoMOC3041MLD1117V33NRF24L01+HLK-PM01

MySensors FilPilote nrf24 bill of materials (BOM)

15 components, 11 distinct parts.

QtyPartRefs
1
ATMEGA328P_Arduino
IC1
2
MOC3041M
U1, U2
1
LD1117V33
U3
1
NRF24L01+
U4
1
HLK-PM01
U5
1
Crystal
Y1
1
CONN_01X03
P1
2
—
D1, D2
2
22p
C1, C2
1
1u
C3
2
220
R1, R2

MySensors FilPilote nrf24 design files

The KiCad project lives in the LudovicLemarinel/KicadDomo repository on GitHub; these links point at the commit this page was built from.

MySensors FilPilote nrf24: common questions

What microcontroller does the MySensors FilPilote nrf24 use?

The MySensors FilPilote nrf24 is built around the ATMEGA328P_Arduino, from the AVR/Arduino family.

How big is the MySensors FilPilote nrf24 PCB?

The MySensors FilPilote nrf24 measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MySensors FilPilote nrf24?

15 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the MySensors FilPilote nrf24 design files?

From the LudovicLemarinel/KicadDomo repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the MySensors FilPilote nrf24 design in my own project?

The repository has no license, so all rights stay with LudovicLemarinel. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MySensors FilPilote nrf24 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in KicadDomo

Similar boards