HardLabs

MySensors SensitiveTouch

LudovicLemarinel·KicadDomo·mySensors_SensitiveTouch/mySensors_SensitiveTouch.kicad_pcb

MySensors SensitiveTouch PCB layout, top view — open source AVR/Arduino board by LudovicLemarinel

About the MySensors SensitiveTouch PCB

MySensors SensitiveTouch is an open source AVR/Arduino PCB design by LudovicLemarinel, published on GitHub. It is a 2-layer board measuring 43 × 45 mm, with 14 components from 11 distinct parts.

Its main chip is the ATMEGA328-A, from the AVR/Arduino family. Other key parts include the AMS1117 and RFM69HW. By type, the board carries 5 resistors, 3 ICs, 3 connectors, 1 LED and 1 capacitor.

Main components on the MySensors SensitiveTouch

ATMEGA328-AAMS1117RFM69HW

MySensors SensitiveTouch bill of materials (BOM)

14 components, 11 distinct parts.

QtyPartRefs
1
ATMEGA328-A
IC1
1
AMS1117
U1
1
RFM69HW
U2
1
POW
P1
1
ICSP
P2
1
FACE
P3
1
BZ
SP1
1
WS2812B
LED1
1
10uF
C3
4
10M
R1, R2, R3, R4
1
100
R5

MySensors SensitiveTouch design files

The KiCad project lives in the LudovicLemarinel/KicadDomo repository on GitHub; these links point at the commit this page was built from.

MySensors SensitiveTouch: common questions

What microcontroller does the MySensors SensitiveTouch use?

The MySensors SensitiveTouch is built around the ATMEGA328-A, from the AVR/Arduino family.

How big is the MySensors SensitiveTouch PCB?

The MySensors SensitiveTouch measures 43 × 45 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MySensors SensitiveTouch?

14 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the MySensors SensitiveTouch design files?

From the LudovicLemarinel/KicadDomo repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the MySensors SensitiveTouch design in my own project?

The repository has no license, so all rights stay with LudovicLemarinel. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MySensors SensitiveTouch without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in KicadDomo

Similar boards