HardLabs

MySensors Gateway

LudovicLemarinel·KicadDomo·MySensors_Gateway/MySensors_Gateway.kicad_pcb

MySensors Gateway PCB layout, top view — open source AVR/Arduino board by LudovicLemarinel

About the MySensors Gateway PCB

MySensors Gateway is an open source AVR/Arduino PCB design by LudovicLemarinel, published on GitHub. It is a 2-layer board measuring 64 × 34 mm, with 15 components from 9 distinct parts.

Its main chip is the arduino_mini, from the AVR/Arduino family. Other key parts include the AP111733, RFM69HW and 74HC245. By type, the board carries 4 ICs, 3 connectors, 3 diodes, 3 resistors and 2 capacitors.

Main components on the MySensors Gateway

AP111733arduino_miniRFM69HW74HC245

MySensors Gateway bill of materials (BOM)

15 components, 9 distinct parts.

QtyPartRefs
1
AP111733
U1
1
arduino_mini
U2
1
RFM69HW
U3
1
74HC245
U4
1
CONN_01X01
P1
2
CONN_01X02
P2, P3
3
LED
D1, D2, D3
2
C
C1, C2
3
R
R1, R2, R3

MySensors Gateway design files

The KiCad project lives in the LudovicLemarinel/KicadDomo repository on GitHub; these links point at the commit this page was built from.

MySensors Gateway: common questions

What microcontroller does the MySensors Gateway use?

The MySensors Gateway is built around the arduino_mini, from the AVR/Arduino family.

How big is the MySensors Gateway PCB?

The MySensors Gateway measures 64 × 34 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MySensors Gateway?

15 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the MySensors Gateway design files?

From the LudovicLemarinel/KicadDomo repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the MySensors Gateway design in my own project?

The repository has no license, so all rights stay with LudovicLemarinel. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MySensors Gateway without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in KicadDomo

Similar boards