HardLabs

MySensors 8Relais

LudovicLemarinel·KicadDomo·mySensors_8Relais/mySensors_8Relais.kicad_pcb

MySensors 8Relais PCB layout, top view — open source AVR/Arduino board by LudovicLemarinel

About the MySensors 8Relais PCB

MySensors 8Relais is an open source AVR/Arduino PCB design by LudovicLemarinel, published on GitHub. It is a 2-layer board measuring 85 × 95 mm, with 25 components from 10 distinct parts.

Its main chip is the ATMEGA328-A, from the AVR/Arduino family. Other key parts include the ULN2803A, AMS1117 and RFM69HW. By type, the board carries 11 connectors, 4 ICs and 2 capacitors.

Main components on the MySensors 8Relais

ATMEGA328-AULN2803AAMS1117RFM69HW

MySensors 8Relais bill of materials (BOM)

25 components, 10 distinct parts.

QtyPartRefs
1
ATMEGA328-A
IC1
1
ULN2803A
IC2
1
AMS1117
U1
1
RFM69HW
U2
1
5VIN
P1
1
ANT
P2
1
CONN_02X03
P3
8
CONN_01X03
P4, P5, P6, P7, P8, P9, P10, P11
8
SRD_Type_C
RLY1, RLY2, RLY3, RLY4, RLY5, RLY6, RLY7, RLY8
2
10uF
C1, C2

MySensors 8Relais design files

The KiCad project lives in the LudovicLemarinel/KicadDomo repository on GitHub; these links point at the commit this page was built from.

MySensors 8Relais: common questions

What microcontroller does the MySensors 8Relais use?

The MySensors 8Relais is built around the ATMEGA328-A, from the AVR/Arduino family.

How big is the MySensors 8Relais PCB?

The MySensors 8Relais measures 85 × 95 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MySensors 8Relais?

25 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the MySensors 8Relais design files?

From the LudovicLemarinel/KicadDomo repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the MySensors 8Relais design in my own project?

The repository has no license, so all rights stay with LudovicLemarinel. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MySensors 8Relais without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in KicadDomo

Similar boards