HardLabs

MySensors 8FilPilotes

LudovicLemarinel·KicadDomo·mySensors_8FilPilotes/mySensors_8FilPilotes.kicad_pcb

MySensors 8FilPilotes PCB layout, top view — open source AVR/Arduino board by LudovicLemarinel

About the MySensors 8FilPilotes PCB

MySensors 8FilPilotes is an open source AVR/Arduino PCB design by LudovicLemarinel, published on GitHub. It is a 2-layer board measuring 79 × 98 mm, with 60 components from 11 distinct parts.

Its main chip is the ATMEGA328-A, from the AVR/Arduino family. Other key parts include the MOC3041M. By type, the board carries 16 ICs, 16 diodes, 16 resistors, 2 capacitors and 1 connector.

Main components on the MySensors 8FilPilotes

MOC3041M

MySensors 8FilPilotes bill of materials (BOM)

60 components, 11 distinct parts.

QtyPartRefs
16
MOC3041M
U5, U6, U7, U8, U9, U10, U11, U12 +8
1
ANT
P2
4
CONN_01X02
1-2, 3-4, 5-6, 7-8
1
5VIN
5V 0V
1
74HC595
74HC595
1
ATMEGA328-A
328p
1
AMS1117
1117
1
RFM69HW
RFM69HW
16
D
D1, D2, D3, D4, D5, D6, D7, D8 +8
2
10uF
C1, C2
16
R
R1, R2, R3, R4, R5, R6, R7, R8 +8

MySensors 8FilPilotes design files

The KiCad project lives in the LudovicLemarinel/KicadDomo repository on GitHub; these links point at the commit this page was built from.

MySensors 8FilPilotes: common questions

What microcontroller does the MySensors 8FilPilotes use?

The MySensors 8FilPilotes is built around the ATMEGA328-A, from the AVR/Arduino family.

How big is the MySensors 8FilPilotes PCB?

The MySensors 8FilPilotes measures 79 × 98 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MySensors 8FilPilotes?

60 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the MySensors 8FilPilotes design files?

From the LudovicLemarinel/KicadDomo repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the MySensors 8FilPilotes design in my own project?

The repository has no license, so all rights stay with LudovicLemarinel. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MySensors 8FilPilotes without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in KicadDomo

Similar boards