HardLabs

MySensors 8Dimmers

LudovicLemarinel·KicadDomo·MySensors_8Dimmers/MySensors_8Dimmers.kicad_pcb

MySensors 8Dimmers PCB layout, top view — open source AVR/Arduino board by LudovicLemarinel

About the MySensors 8Dimmers PCB

MySensors 8Dimmers is an open source AVR/Arduino PCB design by LudovicLemarinel, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 66 components from 14 distinct parts.

Its main chip is the ATMEGA328-A, from the AVR/Arduino family. Other key parts include the LTV-814, MOC3023M and TRIAC_small. By type, the board carries 18 resistors, 17 ICs, 9 connectors, 8 fuses, 8 diodes and 2 capacitors.

Main components on the MySensors 8Dimmers

LTV-814MOC3023MTRIAC_small

MySensors 8Dimmers bill of materials (BOM)

66 components, 14 distinct parts.

QtyPartRefs
1
LTV-814
U1
8
MOC3023M
U6, U7, U8, U9, U10, U11, U12, U13
8
TRIAC_small
U14, U15, U16, U17, U18, U19, U20, U21
9
CONN_01X02
P2, P3, P4, P5, P6, P7, P8, P9 +1
1
5VIN
5V
1
ATMEGA328-A
328p
1
AP1117D33
1117
8
F_Small
F1, F2, F3, F4, F5, F6, F7, F8
1
RFM69HW
RFM69HW
8
Led
D1, D2, D3, D4, D5, D6, D7, D8
2
100µF
C2, C5
2
100k
R1, R18
8
390
R2, R3, R4, R5, R6, R7, R8, R9
8
4k7
R10, R11, R12, R13, R14, R15, R16, R17

MySensors 8Dimmers design files

The KiCad project lives in the LudovicLemarinel/KicadDomo repository on GitHub; these links point at the commit this page was built from.

MySensors 8Dimmers: common questions

What microcontroller does the MySensors 8Dimmers use?

The MySensors 8Dimmers is built around the ATMEGA328-A, from the AVR/Arduino family.

How big is the MySensors 8Dimmers PCB?

The MySensors 8Dimmers measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MySensors 8Dimmers?

66 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the MySensors 8Dimmers design files?

From the LudovicLemarinel/KicadDomo repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the MySensors 8Dimmers design in my own project?

The repository has no license, so all rights stay with LudovicLemarinel. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MySensors 8Dimmers without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in KicadDomo

Similar boards