MultiUse Battery
About the MultiUse Battery PCB
MultiUse Battery is an open source NXP PCB design by LudovicLemarinel, published on GitHub. It is a 2-layer board measuring 50 × 30 mm, with 10 components from 9 distinct parts.
Its main chip is the MAX1724, from the NXP family. By type, the board carries 2 switches, 1 IC and 1 inductor.
It belongs with the power & battery designs in this gallery.
Main components on the MultiUse Battery
MultiUse Battery bill of materials (BOM)
10 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX1724 | TSOT-6-MK06A_Handsoldering | U1 |
| 1 | CONN_01X02 | Pin_Header_Straight_1x02_Pitch2.54mm | 3V3 |
| 1 | 4K7 | R_1206_HandSoldering | 4K7 |
| 1 | C | C_1206_HandSoldering | 10uF |
| 1 | ATMEGA328P-AU | TQFP-32_7x7mm_Pitch0.8mm | 328p |
| 1 | AP111733 | SOT-223 | 1117 |
| 1 | RFM69HW | RFM69HW_SMD_Handsoldering | RFM69HW |
| 2 | CONN_01X03 | Pin_Header_Straight_1x03 | S0, S1 |
| 1 | L | Choke_SMD_1206_Handsoldering | L1 |
MultiUse Battery design files
The KiCad project lives in the LudovicLemarinel/KicadDomo repository on GitHub; these links point at the commit this page was built from.
MultiUse Battery: common questions
What microcontroller does the MultiUse Battery use?
The MultiUse Battery is built around the MAX1724, from the NXP family.
How big is the MultiUse Battery PCB?
The MultiUse Battery measures 50 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MultiUse Battery?
10 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the MultiUse Battery design files?
From the LudovicLemarinel/KicadDomo repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the MultiUse Battery design in my own project?
The repository has no license, so all rights stay with LudovicLemarinel. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MultiUse Battery without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in KicadDomo
AVR/ArduinoMySensors 8Dimmers
100 × 100 mm66 parts2LNo license4
AVR/ArduinoMySensors 8FilPilotes
79 × 98 mm60 parts2LNo license4
AVR/ArduinoMySensors 8RelaisReed
81.3 × 59.7 mm34 parts2LNo license4
AVR/ArduinoMySensors 8Relais
85 × 95 mm25 parts2LNo license4
AVR/ArduinoMySensors 2Relais
56 × 57 mm17 parts2LNo license4
AVR/ArduinoMySensors Gateway
64 × 34 mm15 parts2LNo license4
AVR/ArduinoMySensors FilPilote nrf24
50 × 50 mm15 parts2LNo license4
AVR/ArduinoMySensors FilPilote RFM69
47.5 × 49 mm14 parts2LNo license4
AVR/ArduinoMySensors SensitiveTouch
43 × 45 mm14 parts2LNo license4
AVR/ArduinoMySensors 1Relay
42.5 × 50 mm14 parts2LNo license4
AVR/ArduinoIN16 optoToMySensors
50 × 50 mm11 partsNo license4
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532