8 open source boards using the MAX1724
Real designs built with the MAX1724, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
HB-UNI-TEST-PROG-BOARD V2.2
chianti2000
200.8 × 100.3 mm86 parts2LNo license3AVR/Arduino
AskSinPP
c-klinger
48.5 × 48.5 mm40 parts2LCC-BY-NC-4.00AVR/Arduino
HB-UNI-644
alexreinert
79 × 78 mm64 parts2LCC-BY-NC-4.0104AVR/Arduino
HB-UNI-Sen-CAP-MOIST
stan23
32 × 58 mm38 parts2LCC-BY-NC-4.021Cb minibat chipant
panStamp
25.4 × 56.6 mm29 partsGPL-2.015Minibat carrier board for panStamp
panStamp
25.4 × 55.8 mm29 partsGPL-2.015Battery board for panStamp
panStamp
50.1 × 70.1 mm27 partsGPL-2.015NXP
MultiUse Battery
LudovicLemarinel
50 × 30 mm10 parts2LNo license4
How designs wire the MAX1724
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MAX1724 connects to, and the resistors, capacitors and other passives placed on it.
- The BATT pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 100 nF).
- The BATT pin has a inductor on 6 of 6 designs, most often 10 µH.
- The SHDN pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 100 nF).
- The SHDN pin has a inductor on 5 of 6 designs, most often 10 µH.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| BATTpin 1 | Connected to: BATT 50% · a signal 50% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| SHDNpin 3 | Connected to: BATT 50% · a signal 50% |
|
| OUTpin 4 | Connected to: VCC 67% · a signal 33% | — |
| LXpin 5 | Connected to: Signal 83% · not connected 17% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include HB-UNI-644 by alexreinert, HB-UNI-Sen-CAP-MOIST by stan23, Battery board for panStamp by panStamp and MultiUse Battery by LudovicLemarinel.
The MAX1724 in open source designs
The gallery holds 8 open source boards using the MAX1724 from 6 GitHub repositories; a typical one measures about 49.3 × 57.3 mm and carries around 34 components.
100% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is HB-UNI-644 by alexreinert.
Parts used alongside the MAX1724
Microcontrollers on boards using the MAX1724
What boards using the MAX1724 are built for
MAX1724: common questions
Where can I find a MAX1724 reference design?
Each of the 8 boards on this page is a real design using the MAX1724. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MAX1724 BATT pin connected?
The BATT pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the MAX1724.
How is the MAX1724 SHDN pin connected?
The SHDN pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the MAX1724.
How is the MAX1724 LX pin connected?
The LX pin has a inductor on 5 of 6 designs, most often 10 µH. Counted from the KiCad layouts of 6 open source designs using the MAX1724.
Which microcontrollers do boards using the MAX1724 use?
Most are built on AVR/Arduino (4) and NXP (1).
How big is a typical board using the MAX1724?
The median is 49.3 × 57.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the MAX1724?
By GitHub stars, HB-UNI-644 by alexreinert, with 104 stars.
Can I simulate one of these boards using the MAX1724 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.