Z80DUART2
lynchaj·nhyodyne·Z80DUART2/Z80DUART2.kicad_pcb
About the Z80DUART2 PCB
Z80DUART2 is an open source PCB design by lynchaj, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 70 components from 46 distinct parts.
Other key parts include the 74LS04, 74LS245, 74LS244, 74LS688 and 74LS06. By type, the board carries 22 capacitors, 16 resistors, 11 connectors, 10 ICs, 6 diodes and 2 switches.
It belongs with the retro computing designs in this gallery.
From the project
Modular Backplane Computer
Uses Texas Instruments TL16C2552FN Asynchronous Communication Adapter (ACE) derivative Dual Universal Asynchronous Receiver Transmitter (UART)
44 Pin PLCC format TL16C2552F or compatible
Two TTL level serial port for USB adapters with optional power supplies
External experimental connector with spare GPIO pins
JP1 is connector for External Recovery Button (on-momentary close). Do not jumper, default is none
Main components on the Z80DUART2
Z80DUART2 bill of materials (BOM)
70 components, 46 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS04 74LS244 | DIP-20_W7.62mm | U1 |
| 1 | 74LS245 | DIP-20_W7.62mm | U2 |
| 1 | 74LS245 74LS244 | DIP-20_W7.62mm | U3 |
| 1 | 74LS244 74LS08 | DIP-14_W7.62mm | U4 |
| 1 | 74LS688 | DIP-20_W7.62mm | U6 |
| 1 | 74LS06 | DIP-14_W7.62mm | U7 |
| 1 | TL16C2552FN | PLCC-44_THT-Socket | U8 |
| 1 | 74HC595 MAX232 | DIP-16_W7.62mm | U9 |
| 1 | 74LS688 UART CLK | DIP-14_W7.62mm | U10 |
| 1 | 74HC165 MAX232 | DIP-16_W7.62mm | U11 |
| 1 | DUART_CFG | PinHeader_2x12_P2.54mm_Vertical | J1 |
| 1 | TTL SERIAL | PinHeader_2x06_P2.54mm_Horizontal | J4 |
| 1 | EXT DMA | PinHeader_1x04_P2.54mm_Horizontal | J5 |
| 1 | TTL PWRA | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | TTL PWRB | PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | EXPERIMENT | PinHeader_2x06_P2.54mm_Vertical | J13 |
| 1 | SPARES | PinHeader_1x10_P2.54mm_Vertical | P1 |
| 1 | Z80 BUS BACKPLANE | PinHeader_2x25_P2.54mm_Horizontal | P2 |
| 1 | DAISY CHAIN | PinHeader_1x04_P2.54mm_Vertical | P3 |
| 1 | RS-232 B | PinHeader_2x05_P2.54mm_Horizontal | P4 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RS-232 A | PinHeader_2x05_P2.54mm_Horizontal | P5 |
| 1 | EXT RECOVERY | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | 10K | R_Array_SIP9 | RR1 |
| 1 | IO PORT ADDR | SW_DIP_x8_W7.62mm_Slide | SW1 |
| 1 | RECOVERY | SW_Tactile_SPST_Angled | SW2 |
| 1 | TXRDYB | PinHeader_1x01_P2.54mm_Vertical | TP1 |
| 5 | LED | LED_D3.0mm | D1, D2, D3, D4, D5 |
| 1 | 1N4001 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D6 |
| 9 | 0.1u | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8 +1 |
| 4 | 10u | CP_Radial_D5.0mm_P2.50mm | C10, C11, C17, C22 |
| 6 | 1u | CP_Radial_D5.0mm_P2.50mm | C12, C13, C18, C19, C20, C21 |
| 1 | 0.1UF 1u | CP_Radial_D5.0mm_P2.50mm | C14 |
| 1 | 100NF 1u | CP_Radial_D5.0mm_P2.50mm | C15 |
| 1 | 10UF 10u | CP_Radial_D5.0mm_P2.50mm | C16 |
| 4 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4, R5, R7 |
| 1 | 470OHM 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 4700 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 2KOHM 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | 10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 2 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R14 |
| 1 | 400OHM 4700 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 800OHM 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | 1KOHM 0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 1 | 120OHM 22K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15 |
| 1 | 270OHM 22K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16 |
Z80DUART2 design files
The KiCad project lives in the lynchaj/nhyodyne repository on GitHub; these links point at the commit this page was built from.
Z80DUART2: common questions
How big is the Z80DUART2 PCB?
The Z80DUART2 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Z80DUART2?
70 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Z80DUART2 design files?
From the lynchaj/nhyodyne repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Z80DUART2 design in my own project?
The repository has no license, so all rights stay with lynchaj. Use it as a reference, and ask the author before reusing the design.
More boards in nhyodyne
Z80VDP1B
lynchaj
100 × 100 mm93 parts2LNo license31Z80VDP1A
lynchaj
100 × 100 mm90 parts2LNo license31Z80CTCDART2
lynchaj
100 × 100 mm73 parts2LNo license31Z80PRINT
lynchaj
100 × 100 mm66 parts2LNo license31Z80PSG1
lynchaj
100 × 100 mm64 parts2LNo license31Z80VDC
lynchaj
100 × 100 mm63 parts2LNo license31Z80SERIAL3
lynchaj
100 × 100 mm61 parts2LNo license31AVR/Arduino
Z80DMA2
lynchaj
100 × 100 mm59 parts2LNo license31Z80SERIAL2
lynchaj
100 × 100 mm59 parts2LNo license31Z80BCKPLN2
lynchaj
205 × 100 mm58 parts2LNo license31Z80RAM3
lynchaj
100 × 100 mm58 parts2LNo license31
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k