Z80PSG1
lynchaj·nhyodyne·Z80PSG1/Z80PSG1.kicad_pcb
About the Z80PSG1 PCB
Z80PSG1 is an open source PCB design by lynchaj, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 64 components from 44 distinct parts.
Other key parts include the 74LS04, 74LS245, 74LS244, 74LS139 and 74LS02. By type, the board carries 19 capacitors, 16 resistors, 11 ICs, 10 connectors, 3 diodes and 1 jumper.
It belongs with the retro computing and audio designs in this gallery.
From the project
Modular Backplane Computer
Provides GI AY-3-8910 Programmable Sound Generator with three channel FM synthesis
Atari or MSX compatible joysticks or paddles
JP1 AY-3-8910 test input pins 1-2, default is none
J5 Pins 1-2 all channels merged into channel C, Pins 3-4 all channels merged into channel A, default is none
pins 5-7 audio oscillator /2 pins 7-9 audio oscillator /8 pins 6-8 audio oscillator /1 pins 8-10 audio oscillator /4
Main components on the Z80PSG1
Z80PSG1 bill of materials (BOM)
64 components, 44 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS04 74LS244 | DIP-20_W7.62mm | U1 |
| 1 | 74LS245 | DIP-20_W7.62mm | U2 |
| 1 | 74LS245 74LS244 | DIP-20_W7.62mm | U3 |
| 1 | 74LS244 74LS688 | DIP-20_W7.62mm | U4 |
| 1 | 74LS139 | DIP-16_W7.62mm | U5 |
| 1 | 74LS02 | DIP-14_W7.62mm | U6 |
| 1 | 74LS93 | DIP-14_W7.62mm | U7 |
| 1 | AY-3-8910 | DIP-40_W15.24mm | U8 |
| 1 | 74HC595 74LS221 | DIP-16_W7.62mm | U9 |
| 1 | 74LS688 74LS174 | DIP-16_W7.62mm | U10 |
| 1 | 74HC165 3.5795 MHz | DIP-14_W7.62mm | U11 |
| 1 | POT/VCC | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | JOY/VCC | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | POT_ENB | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | JOY_ENB | PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | AY3-CFG | PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | SPARES | PinHeader_1x10_P2.54mm_Vertical | P2 |
| 1 | Z80 BUS BACKPLANE | PinHeader_2x25_P2.54mm_Horizontal | P3 |
| 1 | JYSTK-A | PinHeader_2x05_P2.54mm_Horizontal | P6 |
| 1 | JYSTK-B | PinHeader_2x05_P2.54mm_Horizontal | P7 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SOUND | PinHeader_2x05_P2.54mm_Horizontal | P8 |
| 1 | TEST2 | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | 10K | R_Array_SIP9 | RR1 |
| 2 | 5K | Potentiometer_Bourns_3386P_Vertical | RV1, RV2 |
| 1 | IO PORT ADDR | SW_DIP_SPSTx08_Slide_9.78x22.5mm_W7.62mm_P2.54mm | SW1 |
| 3 | LED | LED_D3.0mm | D1, D2, D3 |
| 11 | 0.1u | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8 +3 |
| 2 | 10u | CP_Radial_D5.0mm_P2.50mm | C10, C11 |
| 1 | 270p | C_Disc_D5.0mm_W2.5mm_P5.00mm | C13 |
| 1 | 0.1UF 270p | C_Disc_D5.0mm_W2.5mm_P5.00mm | C14 |
| 1 | 100NF 10u | CP_Radial_D5.0mm_P2.50mm | C15 |
| 1 | 10UF 10u | CP_Radial_D5.0mm_P2.50mm | C16 |
| 2 | 0.01u | C_Disc_D5.0mm_W2.5mm_P5.00mm | C17, C18 |
| 2 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R10 |
| 1 | 470OHM 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 3 | 1000 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R5 |
| 1 | 2KOHM 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 3 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8, R9 |
| 1 | 400OHM 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 800OHM 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | 1KOHM 2200 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 1 | 2200 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14 |
| 1 | 120OHM 0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15 |
| 1 | 270OHM 0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16 |
Z80PSG1 design files
The KiCad project lives in the lynchaj/nhyodyne repository on GitHub; these links point at the commit this page was built from.
Z80PSG1: common questions
How big is the Z80PSG1 PCB?
The Z80PSG1 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Z80PSG1?
64 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Z80PSG1 design files?
From the lynchaj/nhyodyne repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Z80PSG1 design in my own project?
The repository has no license, so all rights stay with lynchaj. Use it as a reference, and ask the author before reusing the design.
More boards in nhyodyne
Z80VDP1B
lynchaj
100 × 100 mm93 parts2LNo license31Z80VDP1A
lynchaj
100 × 100 mm90 parts2LNo license31Z80CTCDART2
lynchaj
100 × 100 mm73 parts2LNo license31Z80DUART2
lynchaj
100 × 100 mm70 parts2LNo license31Z80PRINT
lynchaj
100 × 100 mm66 parts2LNo license31Z80VDC
lynchaj
100 × 100 mm63 parts2LNo license31Z80SERIAL3
lynchaj
100 × 100 mm61 parts2LNo license31AVR/Arduino
Z80DMA2
lynchaj
100 × 100 mm59 parts2LNo license31Z80SERIAL2
lynchaj
100 × 100 mm59 parts2LNo license31Z80BCKPLN2
lynchaj
205 × 100 mm58 parts2LNo license31Z80RAM3
lynchaj
100 × 100 mm58 parts2LNo license31
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kExpansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0k