Compact64

mariella-dejong·compact64·hardware/main-board/compact64.kicad_pcb

Compact64 PCB layout, top view — open source board by mariella-dejong

About the Compact64 PCB

Compact64 is an open source PCB design by mariella-dejong, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 390 × 179.8 mm, with 234 components from 103 distinct parts.

Other key parts include the CIA_U1, CIA_U2, 2364A, 2332A and 2114. By type, the board carries 94 capacitors, 44 resistors, 33 ICs, 26 inductors, 8 connectors and 7 transistors.

It belongs with the retro computing and power & battery designs in this gallery.

From the project

Smaller-form-factor Commodore 64 replica built around the original 8500, VIC-II and SID chips

KiCad project of the Compact 64 main board. Open compact64.kicadpro` in KiCad.

The design starts as an unmodified copy of the C64 250407 Replica by Bwack: a reverse-engineered replica of the Commodore 64 assembly 250407 motherboard (PCB KU-14194HB). It will be modified step by step into the Compact 64 main board; see the project README for the roadmap.

The schematic is under active redesign. The PCB layout is not updated along with it: it includes the changes up to and including the HF module replacement (#8), but not the Power Supply sheet (#10) or later changes. Because the board will be…

Main components on the Compact64

Compact64 bill of materials (BOM)

234 components, 103 distinct parts.

QtyPartRefs
1
CIA_U1
U1
1
CIA_U2
U2
2
2364A
U3, U4
1
2332A
U5
1
2114
U6
1
6510_MPU
U7
1
7406N
U8
8
4164-2
U9, U10, U11, U12, U21, U22, U23, U24
2
74LS257
U13, U25
1
74LS258
U14
1
74LS139
U15
2
4066_U28
U16, U28
1
PLA_U17
U17
1
6581
U18
1
VIC
U19
1
556
U20
1
74LS373
U26
1
7408_U27
U27
1
74LS74
U29
1
74LS193
U30
Show 83 more
QtyPartRefs
1
74LS629N
U31
1
MC4044
U32
1
78L05G
U501
4
2SC1815
Q1, Q2, Q7, Q8
1
TP29B/2SD880
Q3
2
BC847
Q501, Q502
1
Crystal
Y1
1
KEYBOARD_20PIN_MALE
CN1
1
SERIAL_BUS_CON
CN4
1
AV_CONN
CN5
1
EXPANSION_PORT
CN6
1
POWER_CON
CN7
2
CONTROL_PORT
CN8, CN9
1
LED_CONNECTOR
CN10
1
IN4371
CR1
1
IN755
CR2
1
BRIDGE_RECTIFIER
CR4
2
1N4001
CR5, CR6
4
1N4148W
CR100, CR101, CR102, CR103
1
JUMPER_WIRE_DASHED
E3
1
1A
F1
2
33R isolated
RP1, RP2
1
3K3 Bussed
RP3
1
3K3 Bussed
RP4
1
220
RV501
1
1K
RV502
1
POWER_SWITCH
SW1
1
7812
VR1
1
7805
VR2
1
1N4148W
D501
22
FERRITE_BEAD
FB1, FB2, FB3, FB4, FB5, FB7, FB8, FB9 +14
1
2.2uH
L2
1
CHOKE
L4
1
1.2uH
L5
1
10uH
L501
53
.1
C1, C2, C3, C4, C5, C6, C7, C9 +45
14
10uF
C8, C12, C13, C14, C17, C24, C34, C57 +6
2
470pF
C10, C11
1
2200uF
C19
2
.22
C20, C21
1
360pF
C23
1
20pF
C36
1
1000pF
C37
1
51pF
C38
2
1800pF
C48, C93
1
16pF 5%
C70
2
82pF
C83, C86
1
.47
C85
1
1000uF
C88
1
470uF
C90
1
100uF
C91
2
.22
C97, C100
1
220pF
C205
2
10uF
C501, C504
1
470nF
C502
1
0.1uF
C503
1
330pF
C505
1
68pF
C506
4
3K3
R1, R43, R44, R45
2
1.5K
R2, R51
2
10K
R3, R7
10
1K
R4, R6, R16, R28, R29, R30, R31, R36 +2
1
560
R5
2
2K7
R17, R37
1
15K
R19
1
100
R26
1
500
R27
2
47K
R33, R34
1
470K
R35
1
390
R39
2
1M
R41, R50
1
82
R42
1
680
R52
1
910
R53
1
47
R501
1
1K
R503
1
3.3K
R504
1
5.6K
R505
3
150
R506, R508, R510
1
75
R507
1
68
R509
1
220
R511
1
470
R512

Compact64 design files

The KiCad project lives in the mariella-dejong/compact64 repository on GitHub; these links point at the commit this page was built from.

Compact64: common questions

How big is the Compact64 PCB?

The Compact64 measures 390 × 179.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Compact64?

234 components, from 103 distinct parts. The full bill of materials is listed on this page.

Where can I download the Compact64 design files?

From the mariella-dejong/compact64 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Compact64 design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which mariella-dejong chose for the repository.

Similar boards