7 open source boards using the 74LS258

Real designs built with the 74LS258, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the 74LS258

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74LS258 connects to, and the resistors, capacitors and other passives placed on it.

  • The ZA pin has a series resistor on 3 of 7 designs, most often 39 Ω (then 47 Ω).
  • The ZB pin has a series resistor on 3 of 7 designs, most often 39 Ω (then 47 Ω).
  • The ZD pin has a series resistor on 3 of 7 designs, most often 39 Ω (then 47 Ω).
ZApin 4Connected to: 74LS257 57%, 74LS373 57%
  • Series resistor on 43% · 39 Ω (2), 47 Ω (1)
ZBpin 7Connected to: 74LS257 57%, 74LS373 57%
  • Series resistor on 43% · 39 Ω (2), 47 Ω (1)
GNDpin 8Connected to: GND 100%
ZDpin 9Connected to: Not connected 57% · a signal 43%
  • Series resistor on 43% · 39 Ω (2), 47 Ω (1)
VCCpin 16Connected to: 5V 71% · a signal 29%

11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include C64 Motherboard KU-14194HB by baldengineer, Raemixx500 by SukkoPera, C64-250407-Replica-KiCad by bwack and KU-14194HB-RevB-KiCad by bwack.

The 74LS258 in open source designs

The gallery holds 7 open source boards using the 74LS258 from 7 GitHub repositories; a typical one measures about 390 × 180.3 mm and carries around 221 components.

100% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.

The most starred is C64 Motherboard KU-14194HB by baldengineer.

What boards using the 74LS258 are built for

74LS258: common questions

Where can I find a 74LS258 reference design?

Each of the 7 boards on this page is a real design using the 74LS258. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 74LS258 ZA pin?

The ZA pin has a series resistor on 3 of 7 designs, most often 39 Ω (then 47 Ω). Counted from the KiCad layouts of 7 open source designs using the 74LS258.

What resistor goes on the 74LS258 ZB pin?

The ZB pin has a series resistor on 3 of 7 designs, most often 39 Ω (then 47 Ω). Counted from the KiCad layouts of 7 open source designs using the 74LS258.

What resistor goes on the 74LS258 ZD pin?

The ZD pin has a series resistor on 3 of 7 designs, most often 39 Ω (then 47 Ω). Counted from the KiCad layouts of 7 open source designs using the 74LS258.

What parts are used alongside the 74LS258?

The 74LS373, 74LS139, 74LS74, 2114 and 2332A appear in the most repositories here.

How big is a typical board using the 74LS258?

The median is 390 × 180.3 mm, and 100% are two-layer designs.

What is the most popular open source board using the 74LS258?

By GitHub stars, C64 Motherboard KU-14194HB by baldengineer, with 442 stars.

Can I simulate one of these boards using the 74LS258 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part