6 open source boards using the MC4044
Real designs built with the MC4044, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
C64 Motherboard KU-14194HB
baldengineer
390.2 × 180.3 mm220 parts2LCC-BY-4.0442C64-250407-Replica
bwack
390 × 179.8 mm214 parts2LCERN-OHL-1.2116KU-14194HB-RevB
bwack
390.2 × 180.3 mm221 parts2LNo license67Exordisk v1
roberto314
160 × 100 mm110 parts2LNo license1Compact64
mariella-dejong
390 × 179.8 mm234 parts2LCERN-OHL-S-2.00Exorset Floppy
roberto314
160 × 100 mm85 parts2LNo license1
How designs wire the MC4044
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MC4044 connects to, and the resistors, capacitors and other passives placed on it.
- The UF pin has a series resistor on 5 of 5 designs, most often 15 kΩ (then 2.2 kΩ).
- The OUT pin has a pull-up to VC on 5 of 5 designs, most often 1 kΩ.
- The OUT pin has a series resistor on 5 of 5 designs, most often 2.7 kΩ.
- The DF pin has a series resistor on 5 of 5 designs, most often 15 kΩ (then 2.2 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| D1pin 2 | Connected to: Not connected 100% | — |
| Vpin 3 | Connected to: 6510_MPU 80% |
|
| PUpin 4 | Connected to: Not connected 100% | — |
| UFpin 5 | Connected to: Signal 100% |
|
| D2pin 6 | Connected to: Not connected 100% | — |
| GNDpin 7 | Connected to: GND 100% | — |
| OUTpin 8 | Connected to: 74LS629N 80% |
|
| DFpin 10 | Connected to: Signal 100% |
|
| PDpin 11 | Connected to: Not connected 100% | — |
| U2pin 12 | Connected to: Not connected 100% | — |
| U1pin 13 | Connected to: Not connected 100% | — |
| VCCpin 14 | Connected to: VC 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include C64 Motherboard KU-14194HB by baldengineer, C64-250407-Replica-KiCad by bwack, KU-14194HB-RevB-KiCad by bwack and Exordisk v1 by roberto314.
The MC4044 in open source designs
The gallery holds 6 open source boards using the MC4044 from 5 GitHub repositories; a typical one measures about 390 × 179.8 mm and carries around 217 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is C64 Motherboard KU-14194HB by baldengineer.
Parts used alongside the MC4044
What boards using the MC4044 are built for
MC4044: common questions
Where can I find a MC4044 reference design?
Each of the 6 boards on this page is a real design using the MC4044. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the MC4044 UF pin?
The UF pin has a series resistor on 5 of 5 designs, most often 15 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 5 open source designs using the MC4044.
What pull-up resistor is used on the MC4044 OUT pin?
The OUT pin has a pull-up to VC on 5 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the MC4044.
What resistor goes on the MC4044 DF pin?
The DF pin has a series resistor on 5 of 5 designs, most often 15 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 5 open source designs using the MC4044.
What parts are used alongside the MC4044?
The 74LS139, 2114, 2332A, 2364A and 4164-2 appear in the most repositories here.
How big is a typical board using the MC4044?
The median is 390 × 179.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the MC4044?
By GitHub stars, C64 Motherboard KU-14194HB by baldengineer, with 442 stars.
Can I simulate one of these boards using the MC4044 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.