7 open source boards using the 6581
Real designs built with the 6581, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
C64 Motherboard KU-14194HB
baldengineer
390.2 × 180.3 mm220 parts2LCC-BY-4.0442C64-250407-Replica
bwack
390 × 179.8 mm214 parts2LCERN-OHL-1.2116KU-14194HB-RevB
bwack
390.2 × 180.3 mm221 parts2LNo license67AVR/Arduino
6502 ACE Board
acwright
335 × 250 mm183 parts2LCERN-OHL-P-2.012AVR/Arduino
CortexPC
danwerner21
244 × 244 mm155 parts2LNo license7MECB SID
epaell
99.8 × 99.8 mm37 parts2LNo license6Compact64
mariella-dejong
390 × 179.8 mm234 parts2LCERN-OHL-S-2.00
How designs wire the 6581
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 6581 connects to, and the resistors, capacitors and other passives placed on it.
- The CAP1A_1 pin has a series capacitor on 7 of 7 designs, most often 470 pF (then 2.2 nF).
- The CAP1B_2 pin has a series capacitor on 7 of 7 designs, most often 470 pF (then 2.2 nF).
- The CAP2A_3 pin has a series capacitor on 7 of 7 designs, most often 470 pF (then 2.2 nF).
- The CAP2B_4 pin has a series capacitor on 7 of 7 designs, most often 470 pF (then 2.2 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CAP1A_1pin 1 | Connected to: Signal 100% |
|
| CAP1B_2pin 2 | Connected to: Signal 100% |
|
| CAP2A_3pin 3 | Connected to: Signal 100% |
|
| CAP2B_4pin 4 | Connected to: Signal 100% |
|
| RES_5pin 5 | Connected to: 6510_MPU 57%, 7406N 57%, CIA_U1 57% |
|
| PHI2_6pin 6 | Connected to: A connector 71%, CIA_U1 57%, CIA_U2 57% |
|
| R/W_7pin 7 | Connected to: 4164-2 57%, 6510_MPU 57%, CIA_U1 57% · GND 29% |
|
| GND_14pin 14 | Connected to: GND 100% | — |
| POTY_23pin 23 | Connected to: 4066_U28 43% · not connected 29% |
|
| POTX_24pin 24 | Connected to: 4066_U28 43% · not connected 29% |
|
| VCC_25pin 25 | Connected to: Signal 57% · VCC 43% |
|
| IN_26pin 26 | Connected to: Signal 71% · not connected 29% |
|
| OUT_27pin 27 | Connected to: Signal 100% |
|
| VDD_28pin 28 | Connected to: Signal 71% · 12V 29% |
|
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include C64 Motherboard KU-14194HB by baldengineer, C64-250407-Replica-KiCad by bwack, KU-14194HB-RevB-KiCad by bwack and 6502 ACE Board by acwright.
The 6581 in open source designs
The gallery holds 7 open source boards using the 6581 from 7 GitHub repositories; a typical one measures about 390 × 180.3 mm and carries around 214 components.
100% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.
The most starred is C64 Motherboard KU-14194HB by baldengineer.
Parts used alongside the 6581
Microcontrollers on boards using the 6581
What boards using the 6581 are built for
6581: common questions
Where can I find a 6581 reference design?
Each of the 7 boards on this page is a real design using the 6581. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 6581 CAP1A_1 pin connected?
The CAP1A_1 pin has a series capacitor on 7 of 7 designs, most often 470 pF (then 2.2 nF). Counted from the KiCad layouts of 7 open source designs using the 6581.
How is the 6581 CAP1B_2 pin connected?
The CAP1B_2 pin has a series capacitor on 7 of 7 designs, most often 470 pF (then 2.2 nF). Counted from the KiCad layouts of 7 open source designs using the 6581.
How is the 6581 CAP2A_3 pin connected?
The CAP2A_3 pin has a series capacitor on 7 of 7 designs, most often 470 pF (then 2.2 nF). Counted from the KiCad layouts of 7 open source designs using the 6581.
What parts are used alongside the 6581?
The 74LS74, 2114, 2332A, 2364A and 4164-2 appear in the most repositories here.
Which microcontrollers do boards using the 6581 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the 6581?
The median is 390 × 180.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the 6581?
By GitHub stars, C64 Motherboard KU-14194HB by baldengineer, with 442 stars.
Can I simulate one of these boards using the 6581 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.