HardLabs

Amplifier5000

MECSEM·electrical·HVDC/Amplifier5000/Amplifier5000.kicad_pcb

Amplifier5000 PCB layout, top view — open source board by MECSEM

About the Amplifier5000 PCB

Amplifier5000 is an open source PCB design by MECSEM, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 37.5 × 22 mm, with 37 components from 20 distinct parts.

Other key parts include the OPA2192IDR, OPA376xxDBV and DAC80501MDGSR. By type, the board carries 15 capacitors, 10 diodes, 8 resistors, 3 ICs and 1 connector.

It belongs with the audio and power & battery designs in this gallery, and the repository also holds 2 earlier revisions of it.

From the project

All the electrical designs for MECSEM.

KiCad sources for all the PCBs in the microscope.

This repository contains only the electrical design: schematics, PCB layouts, and KiCad symbol/footprint library.

A Linux Mint host PC inside the chassis (powered by the in-chassis PicoPSU) commands two central RP2350 controllers over USB:

HV Controller: the master optics-column controller. Drives source bias, lenses, deflectors, the scintillator detector, raster scan, and the PMT readout. Bridges the floating cathode side onto USB. LV Controller: the vacuum subsystem state machine: roughing pump, turbopump VFD (RS-485), isolation valve…

Main components on the Amplifier5000

OPA2192IDROPA376xxDBVDAC80501MDGSR

Amplifier5000 bill of materials (BOM)

37 components, 20 distinct parts.

QtyPartRefs
1
OPA2192IDR
U1
1
OPA376xxDBV
U2
1
DAC80501MDGSR
U3
1
U.FL
J1
8
H5VUD5U
hongjiacheng
D1, D4, D5, D6, D7, D8, D9, D10
1
Green
Hubei KENTO Elec
D2
1
Yellow
Hubei KENTO Elec
D3
1
330pF
Samsung Electro-Mechanics
C1
4
100nF
Samsung Electro-Mechanics
C2, C3, C4, C14
5
100uF
Samsung Electro-Mechanics
C5, C6, C7, C8, C9
1
220nF
Samsung Electro-Mechanics
C10
1
10uF
Samsung Electro-Mechanics
C11
1
100pF
FH(Guangdong Fenghua Advanced Tech)
C12
1
20pF
FH(Guangdong Fenghua Advanced Tech)
C13
1
100pF
Samsung Electro-Mechanics
C15
2
10kΩ
UNI-ROYAL(Uniroyal Elec)
R1, R2
2
47kΩ
UNI-ROYAL(Uniroyal Elec)
R3, R4
1
2MΩ
UNI-ROYAL(Uniroyal Elec)
R5
1
220Ω
UNI-ROYAL(Uniroyal Elec)
R6
2
390Ω
UNI-ROYAL(Uniroyal Elec)
R8, R9

Amplifier5000 design files

The KiCad project lives in the MECSEM/electrical repository on GitHub; these links point at the commit this page was built from.

Amplifier5000: common questions

How big is the Amplifier5000 PCB?

The Amplifier5000 measures 37.5 × 22 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the Amplifier5000?

37 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the Amplifier5000 design files?

From the MECSEM/electrical repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Amplifier5000 design in my own project?

Yes, under the terms of its GPL-3.0 license, which MECSEM chose for the repository.

More boards in electrical

Earlier revisions in the repo: Amplifier600, Amplifier200

Similar boards