8 open source boards using the OPA2192IDR

Real designs built with the OPA2192IDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the OPA2192IDR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the OPA2192IDR connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT_B_7 pin has a series resistor on 6 of 6 designs, most often 1 kΩ (then 12 kΩ).
  • The OUT_A_1 pin has a series resistor on 5 of 6 designs, most often 12 kΩ (then 3.9 kΩ).
  • The -IN_A_2 pin has a series resistor on 5 of 6 designs, most often 10 kΩ (then 20 kΩ).
  • The -IN_B_6 pin has a series resistor on 5 of 6 designs, most often 10 kΩ (then 20 kΩ).
OUT_A_1pin 1Connected to: Signal 83% · VREF_LOCAL 17%
  • Series resistor on 83% · 12 kΩ (1), 3.9 kΩ (1), 10 kΩ (1)
-IN_A_2pin 2Connected to: Signal 83% · VREF_LOCAL 17%
  • Series resistor on 83% · 10 kΩ (3), 20 kΩ (1), 90.9 kΩ (1)
  • Series capacitor on 50% · 47 nF (1), 1 nF (1), 20 pF (1)
  • Resistor to GND on 33% · 10 kΩ (1)
+IN_A_3pin 3Connected to: Signal 67% · GND 33%
  • Series resistor on 67% · 1 kΩ (1), 100 Ω (1), 10 kΩ (1)
  • Capacitor to GND on 33% · 100 nF (2), 1 µF (1)
V-_4pin 4Connected to: -12V 67% · a signal 33%
  • Decoupling capacitor on 67% · 100 nF (7), 4.7 µF (1), 1 µF (1)
+IN_B_5pin 5Connected to: Signal 67% · GND 33%
  • Series resistor on 67% · 1 kΩ (1), 47 kΩ (1), 10 kΩ (1)
-IN_B_6pin 6Connected to: Signal 100%
  • Series resistor on 83% · 10 kΩ (2), 20 kΩ (1), 47 kΩ (1)
  • Series capacitor on 67% · 12 pF (1), 47 nF (1), 1.5 nF (1)
  • Pull-up to VREF_LOCAL on 33% · 10 kΩ (2)
OUT_B_7pin 7Connected to: Signal 100%
  • Series resistor on 100% · 1 kΩ (2), 12 kΩ (1), 100 kΩ (1)
V+_8pin 8Connected to: 12V 67% · a signal 33%
  • Decoupling capacitor on 67% · 100 nF (9), 10 µF (3), 100 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Opensens by genji0306, Smu main by PaulBichl, E psu hardware by embedded-pro and NOS R-2R DAC by k16shikano.

The OPA2192IDR in open source designs

The gallery holds 8 open source boards using the OPA2192IDR from 6 GitHub repositories; a typical one measures about 87.5 × 100 mm and carries around 173 components.

88% use four copper layers or more, and 25% carry an open source license.

The most starred is Smu main by PaulBichl.

Microcontrollers on boards using the OPA2192IDR

What boards using the OPA2192IDR are built for

OPA2192IDR: common questions

Where can I find a OPA2192IDR reference design?

Each of the 8 boards on this page is a real design using the OPA2192IDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the OPA2192IDR OUT_B_7 pin?

The OUT_B_7 pin has a series resistor on 6 of 6 designs, most often 1 kΩ (then 12 kΩ). Counted from the KiCad layouts of 6 open source designs using the OPA2192IDR.

What resistor goes on the OPA2192IDR OUT_A_1 pin?

The OUT_A_1 pin has a series resistor on 5 of 6 designs, most often 12 kΩ (then 3.9 kΩ). Counted from the KiCad layouts of 6 open source designs using the OPA2192IDR.

What resistor goes on the OPA2192IDR -IN_A_2 pin?

The -IN_A_2 pin has a series resistor on 5 of 6 designs, most often 10 kΩ (then 20 kΩ). Counted from the KiCad layouts of 6 open source designs using the OPA2192IDR.

What parts are used alongside the OPA2192IDR?

The AMS1117-3.3, DAC8563SDGSR, OPA1656IDR, OPA192IDR and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the OPA2192IDR use?

Most are built on STM32 (2), PIC (1) and Microchip SAM (1).

How big is a typical board using the OPA2192IDR?

The median is 87.5 × 100 mm, and 13% are two-layer designs.

What is the most popular open source board using the OPA2192IDR?

By GitHub stars, Smu main by PaulBichl, with 1 stars.

Can I simulate one of these boards using the OPA2192IDR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part