HardLabs

MinRead

Monacrylic·Pinscope-benchmark-circuits·Original-schematics/de-link-pcb-master/minRead_pcb.kicad_pcb

MinRead PCB layout, top view — open source ESP32 board by Monacrylic
Simulate this board

About the MinRead PCB

MinRead is an open source ESP32 PCB design by Monacrylic, published on GitHub. It is a 2-layer board measuring 64.5 × 120.5 mm, with 114 components from 43 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TPD4E1U06DBVR, AP3012, AP2112K-3.3, DW01A and MCP73832-2-OT. By type, the board carries 43 resistors, 25 capacitors, 11 switches, 9 transistors, 7 ICs and 6 connectors.

It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.

From the project

This repository contains a suite of sample KiCad circuits used as benchmarks for Pinscope.

This repository contains a suite of sample KiCad circuits used as benchmarks for Pinscope.

The suite is designed to test, validate, and evaluate Pinscope's capabilities in circuit analysis, fault coverage, and netlist validation.

The repository represents four distinct projects. For each project, there are two versions: 1. Original Version: The clean, reference KiCad design, located under Original-schematics/. 2. Fault-Injected Version: A modified version of the reference circuit with simulated hardware, netlist, or schematic faults, in a top-level folder prefixed with x-.

MinRead, from the project README
From the project README

Main components on the MinRead

TPD4E1U06DBVRAP3012AP2112K-3.3ESP32-S3-WROOM-1DW01AMCP73832-2-OT

MinRead bill of materials (BOM)

114 components, 43 distinct parts.

QtyPartRefs
2
TPD4E1U06DBVR
U1, U6
1
AP3012
U2
1
AP2112K-3.3
U3
1
ESP32-S3-WROOM-1
U4
1
DW01A
U5
1
MCP73832-2-OT
U7
1
FS8205A
Q1
4
IRLML6402
Q2, Q3, Q7, Q8
3
BSS138
Q4, Q5, Q6
1
MMBT3904
Q9
1
USB_C_Receptacle
J1
1
FH34SRJ-24S-0.5SH_50_
J2
1
FH34SRJ-6S-0.5SH_50_
J3
1
Conn_01x02
J5
1
PPTC052LFBN-RC
J6
1
Micro_SD_Card
J7
1
TSD05CDYFR
CR1
5
SW_Push
SW1, SW4, SW5, SW7, SW10
6
SW_Push
SW2, SW3, SW6, SW8, SW9, SW12
4
TestPoint
TP1, TP3, TP5, TP7
Show 23 more
QtyPartRefs
5
MBR0530
D1, D2, D4, D5, D6
1
MBR0540
D7
2
10u
L1, L2
1
1n
C1
12
4.7u
C2, C3, C9, C10, C11, C12, C13, C14 +4
3
22u
C4, C6, C32
6
1u
C5, C8, C18, C19, C20, C22
3
0.1u
C7, C33, C36
3
1M
R1, R10, R12
2
5.1k
R2, R3
15
10k
R4, R5, R6, R7, R8, R9, R13, R15 +7
1
12k
R11
1
3
R14
1
1k
R16
1
5.6k
R18
1
20k
R19
1
56k
R20
12
33
R21, R22, R23, R24, R25, R26, R29, R30 +4
1
0
R27
1
33k
R35
1
68k
R36
1
82
R37
1
100k
R38

MinRead design files

The KiCad project lives in the Monacrylic/Pinscope-benchmark-circuits repository on GitHub; these links point at the commit this page was built from.

MinRead: common questions

What microcontroller does the MinRead use?

The MinRead is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the MinRead PCB?

The MinRead measures 64.5 × 120.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MinRead?

114 components, from 43 distinct parts. The full bill of materials is listed on this page.

Where can I download the MinRead design files?

From the Monacrylic/Pinscope-benchmark-circuits repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MinRead design in my own project?

The repository has no license, so all rights stay with Monacrylic. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MinRead without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Pinscope-benchmark-circuits

Similar boards