HardLabs

PCB P L2 PCB 2022-10-05

nanosatlab·pocat-hw·pq_pl2/Imports/PCB_P L2_PCB_2022-10-05.kicad_pcb

PCB P L2 PCB 2022-10-05 layout, top view — open source board by nanosatlab

About the PCB P L2 PCB 2022-10-05

PCB P L2 PCB 2022-10-05 is an open source PCB design by nanosatlab, published on GitHub. It is a 4-layer board measuring 40 × 40 mm, with 58 components from 28 distinct parts.

By type, the board carries 20 capacitors, 14 resistors, 7 inductors, 4 connectors and 2 diodes.

It belongs with the rf & radio, power & battery and sensors designs in this gallery.

From the project

IEEE PocketQubes

Hardware repository for the IEEE GRSS PocketQube built at the NanoSat Lab (UPC).

It holds the complete electrical and mechanical design of the satellite: KiCad projects for every PCB in the stack, the SolidWorks/STEP assembly of the full spacecraft, the deployment mechanisms, and the ground/mechanical support equipment used to integrate and test it.

This repository contains design data only — there is nothing to build or run. Flight and ground software live elsewhere, as does the PL3 payload hardware (nanosatlab/pocat-rfi-5g).

PCB P L2 PCB 2022-10-05 bill of materials (BOM)

58 components, 28 distinct parts.

QtyPartRefs
4
SLW-110-01-T-S
J1, J2, J3, J4
2
TPS613226ADBVT
B3.6VIF, B3.6VRF
2
LT1949ES8#PBF
B10V, B22V
3
LEE2-6+
LNA1, LNA2, LNA3
4
MS-156C3
PROBE1, PROBE2, PROBE3, PROBE4
2
MBRM120ET3G
D1, D2
2
100nH
L1, L2
1
3.3uH
L3
2
10uH
L4, L5
2
4.7uH
L6, L7
4
10pF
C1, C2, C3, C4
4
100pF
C5, C6, C16, C17
2
330pF
C7, C8
2
22u
C9, C10
2
10uF
C11, C12
1
1nF
C13
1
1uF
C14
2
33nF
C15, C20
2
22uF
C18, C19
2
68K
R1, R2
Show 8 more
QtyPartRefs
1
160K
R3
2
10K
R4, R8
1
120K
R5
3
20K
R6, R7, R9
1
100K
R10
1
33K
R11
1
51
R12
2
5k
R13, R14

PCB P L2 PCB 2022-10-05 design files

The KiCad project lives in the nanosatlab/pocat-hw repository on GitHub; these links point at the commit this page was built from.

PCB P L2 PCB 2022-10-05: common questions

How big is the PCB P L2 PCB 2022-10-05?

The PCB P L2 PCB 2022-10-05 measures 40 × 40 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the PCB P L2 PCB 2022-10-05?

58 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB P L2 PCB 2022-10-05 design files?

From the nanosatlab/pocat-hw repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the PCB P L2 PCB 2022-10-05 design in my own project?

The repository has no license, so all rights stay with nanosatlab. Use it as a reference, and ask the author before reusing the design.

More boards in pocat-hw

Similar boards