PQ Lat Board
About the PQ Lat Board
PQ Lat Board is an open source PCB design by nanosatlab, published on GitHub. It is a 6-layer board measuring 48 × 48 mm, with 22 components from 17 distinct parts.
Other key parts include the TCN75AVOA713. By type, the board carries 2 connectors, 2 diodes, 1 IC and 1 capacitor.
It belongs with the rf & radio, power & battery and sensors designs in this gallery.
From the project
IEEE PocketQubes
Hardware repository for the IEEE GRSS PocketQube built at the NanoSat Lab (UPC).
It holds the complete electrical and mechanical design of the satellite: KiCad projects for every PCB in the stack, the SolidWorks/STEP assembly of the full spacecraft, the deployment mechanisms, and the ground/mechanical support equipment used to integrate and test it.
This repository contains design data only — there is nothing to build or run. Flight and ground software live elsewhere, as does the PL3 payload hardware (nanosatlab/pocat-rfi-5g).
Main components on the PQ Lat Board
PQ Lat Board bill of materials (BOM)
22 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCN75AVOA713 | TCN75AVOA | IC1 |
| 1 | Conn_01x11_MountingPin | Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal | J1 |
| 1 | Conn_Coaxial | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J2 |
| 1 | bridgemaker | Bridgemaker | Annotation1 |
| 1 | snail | Snail | Annotation2 |
| 1 | pocat-lektron | pocat_lektron | Annotation3 |
| 1 | Logo lektron | NSL_hexagon | Annotation4 |
| 1 | telecos | Telecos | Annotation5 |
| 1 | Nanosatlab | NSL-small | Annotation6 |
| 1 | UPC | UPC_small | Annotation7 |
| 1 | GRSS | GRSS | Annotation8 |
| 6 | 0R | R_0805_2012Metric | GA0, GA1, GA2, VA0, VA1, VA2 |
| 1 | ~ | Lighttricity_S3040_CIC | SC1 |
| 1 | 4.7 | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | TK1 |
| 1 | SLCD-61N8 | SLCD-61N8 | D1 |
| 1 | LED | LED_0402_1005Metric | D2 |
| 1 | 1 uF | C_0603_1608Metric | C1 |
PQ Lat Board design files
The KiCad project lives in the nanosatlab/pocat-hw repository on GitHub; these links point at the commit this page was built from.
PQ Lat Board: common questions
How big is the PQ Lat Board?
The PQ Lat Board measures 48 × 48 mm, has 6 copper layers and is 2 mm thick.
How many components are on the PQ Lat Board?
22 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the PQ Lat Board design files?
From the nanosatlab/pocat-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PQ Lat Board design in my own project?
The repository has no license, so all rights stay with nanosatlab. Use it as a reference, and ask the author before reusing the design.
More boards in pocat-hw
RP2040/RP2350EGSE
327 × 271 mm109 parts6LNo license9
PQ EPS
40 × 40 mm85 parts4LNo license9
PQ PL2
40 × 40 mm76 parts4LNo license9
STM32OBC&COMMS subsystem
40 × 40 mm65 parts4LNo license9
STM32Pq obc comms old
40 × 40 mm62 parts4LNo license9
RP2040/RP2350ADCS subsystem
40 × 40 mm58 parts6LNo license9
PCB P L2 PCB 2022-10-05
40 × 40 mm58 parts4LNo license9
PQ BotBoard
64 × 52 mm29 parts6LNo license9
PQ1 TopBoard
50 × 50 mm15 parts2LNo license9
PQ Botnotsobot
64 × 58 mm9 parts2LNo license9
PQ PL1
40 × 40 mm5 parts2LNo license9
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k