9 open source boards using the BMP180
Real designs built with the BMP180, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PanStamp flexible battery board
panStamp
2 × 5 mm80 partsGPL-2.015Bmp180 tryout
louiscklaw
11.9 × 9.9 mm4 parts2LNo license0NXP
Rocketometer6050
kwan3217
55.9 × 22.9 mm72 partsGPL-2.02NXP
Loginator pihat
kwan3217
65 × 56 mm65 parts2LGPL-2.02STM32
Flightcontroller
manisonik
30.5 × 26.7 mm17 parts2LNo license0AVR/Arduino
Tomo
kwan3217
35.6 × 55.9 mm57 parts2LGPL-2.02Cb minibat chipant
panStamp
25.4 × 56.6 mm29 partsGPL-2.015Minibat carrier board for panStamp
panStamp
25.4 × 55.8 mm29 partsGPL-2.015Battery board for panStamp
panStamp
50.1 × 70.1 mm27 partsGPL-2.015
The BMP180 in open source designs
The gallery holds 9 open source boards using the BMP180 from 4 GitHub repositories; a typical one measures about 30.5 × 55.8 mm and carries around 29 components.
100% are two-layer designs, the rest use four layers or more, and 78% carry an open source license.
The most starred is PanStamp flexible battery board by panStamp.
Microcontrollers on boards using the BMP180
What boards using the BMP180 are built for
BMP180: common questions
Where can I find a BMP180 reference design?
Each of the 9 boards on this page is a real design using the BMP180. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the BMP180 use?
Most are built on NXP (2), AVR/Arduino (1) and STM32 (1).
How big is a typical board using the BMP180?
The median is 30.5 × 55.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the BMP180?
By GitHub stars, PanStamp flexible battery board by panStamp, with 15 stars.
Can I simulate one of these boards using the BMP180 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.