Moxl
perryc·moxl·hardware/moxl-hat/moxl-hat.kicad_pcb
About the Moxl PCB
Moxl is an open source PCB design by perryc, published on GitHub under the Apache-2.0 license. It is a 6-layer board measuring 65 × 56 mm, with 88 components from 57 distinct parts.
Other key parts include the MAX31855KASA, TLP293-4, ADS1115IDGS, MCP251863T-E/SSVAO and PCA9685PW. By type, the board carries 27 resistors, 24 capacitors, 12 ICs, 12 connectors, 5 test points and 2 fuses.
It belongs with the robotics & motion, rf & radio and dev boards & breakouts designs in this gallery.
From the project
Airstrip Grade DIY Robot Mower Project - aka Robot Mower XL
An autonomous mower for large-scale grass areas like airstrips, built with ROS2 and RTK GPS.
Mowing a grass airstrip is a big job and the guy with the plane is often not around to cut it. This project has been kicking around for nearly 10 years now, but with "spring is coming soon" optimism, a lot of Claude Code help, and a few CDS2-ers pitching in — maybe we can cut some grass this year. The donor mower was chosen simply because we had one sitting at the farm not getting used.
Main components on the Moxl
Moxl bill of materials (BOM)
88 components, 57 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX31855KASA | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 2 | TLP293-4 | SOIC-16_4.55x10.3mm_P1.27mm | U2, U4 |
| 1 | ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | MCP251863T-E/SSVAO | SSOP-28_5.3x10.2mm_P0.65mm | U5 |
| 1 | PCA9685PW | TSSOP-28_4.4x9.7mm_P0.65mm | U6 |
| 1 | ULN2003A | SOP-16_4.4x10.4mm_P1.27mm | U7 |
| 1 | CAT24C256 | TSSOP-8_4.4x3mm_P0.65mm | U8 |
| 1 | MAX3221EIPWR | TSSOP-16_4.4x5mm_P0.65mm | U9 |
| 1 | C5605 74HC14D,653 Nexperia | SOIC-14_L8.7-W3.9-P1.27-LS6.0-BL | U10 |
| 1 | TPS7A7001DDA | TI_SO-PowerPAD-8 | U12 |
| 1 | XL4015 | TO-263-5_TabPin3 | U15 |
| 1 | TAXM20M4QLDCDT2T 20Mhz | Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | 12V | JST_VH_B2P-VH-B_1x02_P3.96mm_Vertical | J1 |
| 1 | C594232 CAN | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | Left Motor | PinHeader_2x04_P2.54mm_Vertical | J3 |
| 1 | Right Motor | PinHeader_2x04_P2.54mm_Vertical | J4 |
| 1 | C157991 Relay Drivers | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J5 |
| 1 | CONN_01X08_PIN Conn_01x08_Pin | JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J6 |
| 1 | C157993 Analog Sense | JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J7 |
| 1 | C157993 Pulse_Inputs | JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J8 |
Show 37 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C158012 CHT_Type_K | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 1 | GPIO | PinSocket_2x20_P2.54mm_Vertical | J10 |
| 1 | RS232 | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J11 |
| 1 | CONN_01X03_PIN Conn_01x03_Pin | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J12 |
| 1 | C20627123 3A | Fuse_1812_4532Metric | F1 |
| 1 | 200MA 200mA | Fuse_0805_2012Metric | F2 |
| 1 | ID_WP | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | GND | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1 |
| 1 | 5V | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP2 |
| 1 | 3V3 | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP3 |
| 1 | 12V | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP6 |
| 1 | 6V | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP7 |
| 1 | TPSMB33A | D_SMB | D1 |
| 1 | B540 | D_SMC | D13 |
| 1 | TMPC0618H-2R2MG-D 2.2uH | L_6.3x6.3_H3 | L1 |
| 1 | 33UH/4A 33uH/4A | L_Changjiang_FXL1040 | L4 |
| 5 | CL10B104KC8NNNC .1uF | C_0603_1608Metric | C1, C2, C3, C10, C11 |
| 2 | 18PF 18pF | C_0402_1005Metric | C4, C5 |
| 1 | C14663 .1uF | C_0603_1608Metric | C6 |
| 4 | 1UF 1uF | C_0805_2012Metric | C7, C25, C26, C27 |
| 1 | CL21B473KBCNNNC 47nF | C_0805_2012Metric | C8 |
| 4 | 47UF/25V 47uF/25V | C_1210_3225Metric | C9, C18, C20, C21 |
| 2 | 10NF 10nF Samsung Electro-Mechanics | C_0402 | C12, C17 |
| 4 | 100NF 100nF | C_0402_1005Metric | C13, C14, C15, C16 |
| 1 | 10UF 10uF Samsung Electro-Mechanics | C_0603 | C19 |
| 1 | 0 | R_0402_1005Metric | R1 |
| 2 | 3.9kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R2, R3 |
| 3 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0603x4 | R4, R5, R25 |
| 8 | 330Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R6, R7, R8, R9, R10, R11, R12, R13 |
| 2 | 100kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R14, R15 |
| 4 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R16, R22, R23, R28 |
| 1 | 27kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R17 |
| 1 | 100Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R18 |
| 2 | 0Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R19, R20 |
| 1 | 2.7kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R24 |
| 1 | 30.1K | R_0603 | R26 |
| 1 | 274K | R_0603 | R27 |
Moxl design files
The KiCad project lives in the perryc/moxl repository on GitHub; these links point at the commit this page was built from.
Moxl: common questions
How big is the Moxl PCB?
The Moxl measures 65 × 56 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Moxl?
88 components, from 57 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Moxl design files?
From the perryc/moxl repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Moxl design in my own project?
Yes, under the terms of its Apache-2.0 license, which perryc chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k