Tar team1-hardware
pranavs41·tar-team1-hardware·pcb/network-drone-fc/network-drone-fc.kicad_pcb
About the Tar team1-hardware PCB
Tar team1-hardware is an open source ESP32 PCB design by pranavs41, published on GitHub. It is a 4-layer board measuring 36 × 39 mm, with 83 components from 52 distinct parts.
Its main chip is the ESP32-S3FN8, from the ESP32 family. Other key parts include the USBLC6-2SC6, AP63205WU-7, TLV75733PDRVR, TPS7A2033PDBVR and ICM-42688-P. By type, the board carries 40 capacitors, 15 resistors, 8 ICs, 8 connectors, 5 diodes and 4 inductors.
It belongs with the robotics & motion designs in this gallery.
From the project
Texas Aerial Robotics Team 1 hardware
Hardware for the Team 1 swarm mapping project (Texas Aerial Robotics, UT Austin).
- Wiring something to the board, or writing firmware for it: docs/hardware-reference.md has every connector, pin, voltage and limit on one page. - Reading the schematic without KiCad: schematics/network-drone-fc-schematic.pdf. - Designing the frame around the board: cad/network-drone-fc.step is the assembled board as a 3D part. - Who is doing what: TASKS.md lists each person's tasks and where their work meets someone else's. - What one drone is made of and costs: docs/parts-list.md has every part with its…

Main components on the Tar team1-hardware
Tar team1-hardware bill of materials (BOM)
83 components, 52 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3FN8 Espressif | QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm | U1 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U2 |
| 1 | AP63205WU-7 DIODES(美台) | TSOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U3 |
| 1 | TLV75733PDRVR TI(德州仪器) | TDFN-6_L2.0-W2.0-P0.65-TL-EP | U4 |
| 1 | TPS7A2033PDBVR TI(德州仪器) | SOT-23-5_L2.9-W1.6-P0.95-LS2.8-BR | U5 |
| 1 | ICM-42688-P TDK InvenSense(应美盛) | LGA-14_L3.0-W2.5-P0.50-TL | U6 |
| 1 | BMP581 Bosch Sensortec | LGA-10_L2.0-W2.0-P0.50-TL_BMP581 | U7 |
| 1 | MAX-M10S-00B MAX-M10S u-blox | SMD-18_L10.1-W9.7-P1.10-TL_SKG09F | U8 |
| 1 | Q22FA12800101 FA-128 40MHz 10pF EPSON(爱普生) | CRYSTAL-SMD_4P-L2.0-W1.6-BL | X1 |
| 1 | U.FL-R-SMT-1(80) U.FL-R-SMT-1 HRS(广濑) | RF-SMD_FRF05002-JSS103M | J1 |
| 1 | TYPE-C 16PIN 2MD(073) TYPE-C 16PIN 2MD SHOU HAN(首韩) | USB-C-SMD_TYPE-C-16PIN-2MD-073 | J2 |
| 1 | U.FL GPS Hirose | RF-SMD_FRF05002-JSS103M | J3 |
| 1 | SM08B-SRSS-TB ESC JST | CONN-TH_SM08B-SRSS-TB-LF-SN | J4 |
| 1 | Sensor port 5V I2C | CONN-SMD_4P-P1.25_SM04B-GHS-TB-LF-SN | J5 |
| 1 | BM04B-SRSS-TB Radio UART 5V JST | JST_SH_BM04B-SRSS-TB_1x04_Vertical | J6 |
| 1 | SM07B-SRSS-TB Charging board JST | JST_SH_SM07B-SRSS-TB_1x07_Horizontal | J7 |
| 1 | BM04B-SRSS-TB Landing sensor 5V I2C JST | JST_SH_BM04B-SRSS-TB_1x04_Vertical | J8 |
| 1 | RESET | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | BOOT | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | 1N5819HW-7-F 1N5819HW Diodes Incorporated | D_SOD-123 | D1 |
Show 32 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 150060RS75000 RED Würth Elektronik | LED_0603_1608Metric | D2 |
| 1 | 150060VS75000 GREEN Würth Elektronik | LED_0603_1608Metric | D3 |
| 1 | 150060YS75000 YELLOW Würth Elektronik | LED_0603_1608Metric | D4 |
| 1 | SMAJ12A Littelfuse | SMA_L4.4-W2.6-LS5.0-RD | D5 |
| 1 | LQG15HS2N0B02D 2.0nH Murata | L_0402_1005Metric | L1 |
| 1 | CIGW252010EH4R7MNE 4.7uH Samsung Electro-Mechanics | L_1008_2520Metric | L2 |
| 1 | 27nH DNP | L_0402_1005Metric | L3 |
| 1 | LQW15AN24NG00D 24nH Murata | L_0402_1005Metric | L4 |
| 7 | GRM155R71C104KA88J 0.1uF Murata | C_0402_1005Metric | C1, C2, C7, C9, C25, C38, C39 |
| 7 | CL05A105KP5NNNC 1uF Samsung Electro-Mechanics | C_0402_1005Metric | C3, C5, C10, C11, C20, C23, C37 |
| 1 | GRM188R60J106ME47D 10uF 6.3V Murata | C_0603_1608Metric | C4 |
| 3 | GRM155R71H103KA88D 10nF Murata | C_0402_1005Metric | C6, C27, C32 |
| 1 | 0.1uF | C_0402_1005Metric | C8 |
| 2 | GRM1555C1H150JA01D 15pF Murata | C_0402_1005Metric | C12, C13 |
| 2 | DNP | C_0402_1005Metric | C14, C15 |
| 1 | C2012X5R1E106K125AB 10uF 25V TDK | C_0805_2012Metric | C16 |
| 7 | GRM155R71C104KA88J 100nF Murata | C_0402_1005Metric | C17, C24, C28, C29, C31, C34, C36 |
| 2 | GRM21BR61C226ME44L 22uF 16V Murata | C_0805_2012Metric | C18, C19 |
| 2 | 1uF | C_0402_1005Metric | C21, C22 |
| 1 | GRM155R61C225KE11J 2.2uF Murata | C_0402_1005Metric | C26 |
| 2 | GRM188R60J106ME47D 10uF Murata | C_0603_1608Metric | C30, C40 |
| 1 | 100nF | C_0402_1005Metric | C33 |
| 1 | TCJD107M025R0055 100uF 25V polymer Kyocera AVX | CP_EIA-7343-31_Kemet-D_HandSolder | C35 |
| 4 | RC0402FR-0710KL 10k Yageo | R_0402_1005Metric | R1, R10, R11, R16 |
| 1 | RC0402JR-070RL 0 Yageo | R_0402_1005Metric | R3 |
| 2 | RC0402FR-075K1L 5.1k Yageo | R_0402_1005Metric | R4, R5 |
| 2 | RC0402FR-071KL 1k Yageo | R_0402_1005Metric | R6, R8 |
| 1 | RC0402FR-07470RL 470 Yageo | R_0402_1005Metric | R7 |
| 1 | RC0402FR-07100KL 100k Yageo | R_0402_1005Metric | R9 |
| 2 | RC0402FR-072K2L 2.2k Yageo | R_0402_1005Metric | R12, R13 |
| 1 | RC0402FR-07143KL 143k Yageo | R_0402_1005Metric | R14 |
| 1 | RC0402FR-0734KL 34k Yageo | R_0402_1005Metric | R15 |
Tar team1-hardware design files
The KiCad project lives in the pranavs41/tar-team1-hardware repository on GitHub; these links point at the commit this page was built from.
Tar team1-hardware: common questions
What microcontroller does the Tar team1-hardware use?
The Tar team1-hardware is built around the ESP32-S3FN8, from the ESP32 family.
How big is the Tar team1-hardware PCB?
The Tar team1-hardware measures 36 × 39 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Tar team1-hardware?
83 components, from 52 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tar team1-hardware design files?
From the pranavs41/tar-team1-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tar team1-hardware design in my own project?
The repository has no license, so all rights stay with pranavs41. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Tar team1-hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k