HardLabs

Kuhglocke GS

Queens-Rocket-Engineering-Team·av-telemetry·Schematics/Kuhglocke_GS/Kuhglocke_GS.kicad_pcb

Kuhglocke GS PCB layout, top view — open source ESP32 board by Queens-Rocket-Engineering-Team

About the Kuhglocke GS PCB

Kuhglocke GS is an open source ESP32 PCB design by Queens-Rocket-Engineering-Team, published on GitHub. It is a 2-layer board measuring 65 × 70 mm, with 115 components from 59 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the P3T1755DPZ, CP2102N-Axx-xQFN28, RFM95W-915S2, ACS70331EOLC and LM66100DCKR. By type, the board carries 38 resistors, 31 capacitors, 13 ICs, 9 connectors, 7 transistors and 7 switches.

It belongs with the rf & radio and power & battery designs in this gallery.

From the project

QRET Avionics PCBs and firmware for telemetry

This directory contains the V1.0 revision of the Kuhglocke ground station. It has several known problems;

Main components on the Kuhglocke GS

P3T1755DPZCP2102N-Axx-xQFN28ESP32-S3-WROOM-1RFM95W-915S2ACS70331EOLCLM66100DCKRMAX98357AETE_TTPS63001DRCRYIC31616GMSGG GPSTPB4056B2X-ES1RAMS1117-3.3NAU7802SGI

Kuhglocke GS bill of materials (BOM)

115 components, 59 distinct parts.

QtyPartRefs
1
P3T1755DPZ
IC1
1
CP2102N-Axx-xQFN28
U1
1
ESP32-S3-WROOM-1
U2
1
RFM95W-915S2
U3
1
ACS70331EOLC
U4
2
LM66100DCKR
U5, U6
1
MAX98357AETE_T
U7
1
TPS63001DRCR
U8
1
YIC31616GMSGG GPS
U9
1
TPB4056B2X-ES1R
U10
1
AMS1117-3.3
U11
1
NAU7802SGI
U12
3
AO3401A
Q1, Q3, Q6
2
MMBT3904
Q2, Q5
2
AO3400A
Q4, Q7
1
USB_C_Female_USB2_Small
J1
1
MSD-1-A MicroSD Slot
J2
1
~
J3
1
1S Li-Ion Cell
J4
1
Speaker
J5
Show 39 more
QtyPartRefs
1
MB_A
J6
1
MB_B
J7
1
DB_A
J8
1
DB_B
J9
1
Antenna
AE1
1
ADC_REFP
JP6
1
SW_ESP_BOOT_MODE
SW1
1
SW_ESP_RESET
SW2
1
SW_DOWN
SW3
1
SW_ENTER
SW4
1
SW_UP
SW5
1
SW_BACK
SW6
1
PWR
SW7
5
WS2812B
D1, D4, D5, D6, D7
1
INT_PWR_LED (RED)
D2
1
DB_LED (GRN)
D3
1
2.2uH
L1
1
100uF
C1
10
0.1uF
C2, C5, C9, C12, C13, C16, C21, C22 +2
9
1uF
C3, C4, C7, C8, C14, C15, C20, C23 +1
1
4.7uF
C6
9
10uF
C10, C17, C18, C19, C24, C26, C27, C28 +1
1
47uF
C11
14
10k
R1, R3, R11, R16, R17, R20, R21, R22 +6
1
1.8k
R2
1
1.5k
R4
2
5.1k
R5, R6
1
2.4k
R7
1
3.9k
R8
4
100k
R9, R18, R36, R38
2
51k
R10, R37
2
510
R12, R39
3
1k
R13, R28, R29
1
2k
R14
1
5.6k
R15
2
4.7k
R24, R25
1
22k
R30
1
47k
R31
1
100
R35

Kuhglocke GS design files

The KiCad project lives in the Queens-Rocket-Engineering-Team/av-telemetry repository on GitHub; these links point at the commit this page was built from.

Kuhglocke GS: common questions

What microcontroller does the Kuhglocke GS use?

The Kuhglocke GS is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Kuhglocke GS PCB?

The Kuhglocke GS measures 65 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kuhglocke GS?

115 components, from 59 distinct parts. The full bill of materials is listed on this page.

Where can I download the Kuhglocke GS design files?

From the Queens-Rocket-Engineering-Team/av-telemetry repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Kuhglocke GS design in my own project?

The repository has no license, so all rights stay with Queens-Rocket-Engineering-Team. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Kuhglocke GS without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in av-telemetry

Similar boards