Z80-computer
rjw57·z80-computer·hw/hw.kicad_pcb
About the Z80-computer PCB
Z80-computer is an open source AVR/Arduino PCB design by rjw57, published on GitHub. It is a 2-layer board measuring 99.1 × 99.1 mm, with 45 components from 29 distinct parts.
Its main chip is the ATmega328P-PU, from the AVR/Arduino family. Other key parts include the 74HC161, 74HC74, 74HC08, 74HC138 and Z80CPU. By type, the board carries 12 ICs, 12 capacitors, 9 connectors, 8 resistors, 3 diodes and 1 crystal.
It belongs with the retro computing designs in this gallery.
Main components on the Z80-computer
Z80-computer bill of materials (BOM)
45 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega328P-PU | DIP-28_W7.62mm_Socket | U1 |
| 1 | 74HC161 | DIP-16_W7.62mm_Socket | U2 |
| 2 | 74HC74 | DIP-14_W7.62mm_Socket | U3, U9 |
| 1 | 74HC08 | DIP-14_W7.62mm_Socket | U4 |
| 1 | 74HC138 | DIP-16_W7.62mm_Socket | U5 |
| 1 | Z80CPU | DIP-40_W15.24mm_Socket | U6 |
| 1 | 74HCS299 | DIP-20_W7.62mm_Socket | U7 |
| 1 | 74HC32 | DIP-14_W7.62mm_Socket | U8 |
| 1 | CY7C199 | DIP-28_W7.62mm_Socket | U10 |
| 1 | 74HC04 | DIP-14_W7.62mm_Socket | U11 |
| 1 | 74HC165 | DIP-16_W7.62mm_Socket | U12 |
| 1 | 25M175 | Oscillator_DIP-8 | X1 |
| 1 | Keyboard | PinHeader_2x04_P2.54mm_Vertical | J1 |
| 1 | CPU | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | ISP | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | UART | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | A[0..7] | PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | A[8..15] | PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | D[0..7] | PinHeader_1x08_P2.54mm_Vertical | J7 |
| 1 | VGA | PinSocket_1x08_P2.54mm_Vertical | J8 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PWR | PinHeader_1x04_P2.54mm_Vertical | J9 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 1 | PWR | LED_D5.0mm | D3 |
| 12 | 100n | C_Disc_D3.0mm_W2.0mm_P2.50mm | C1, C2, C3, C4, C5, C6, C7, C8 +4 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 2 | 4K7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 3 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R6 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 220R | R_Array_SIP9 | RN1 |
Z80-computer design files
The KiCad project lives in the rjw57/z80-computer repository on GitHub; these links point at the commit this page was built from.
- Layouthw/hw.kicad_pcb
Z80-computer: common questions
What microcontroller does the Z80-computer use?
The Z80-computer is built around the ATmega328P-PU, from the AVR/Arduino family.
How big is the Z80-computer PCB?
The Z80-computer measures 99.1 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Z80-computer?
45 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Z80-computer design files?
From the rjw57/z80-computer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Z80-computer design in my own project?
The repository has no license, so all rights stay with rjw57. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Z80-computer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k