Ollyfc
rland93·ollyfc·hardware/v3/ofc_v3/ofc_v3.kicad_pcb
About the Ollyfc PCB
Ollyfc is an open source STM32 PCB design by rland93, published on GitHub under the MPL-2.0 license. It is a 4-layer board measuring 45 × 98 mm, with 101 components from 43 distinct parts.
Its main chip is the STM32F401RCTX, from the STM32 family. Other key parts include the BMP388, BMI088, GT-USB-7010ASV, NPA-730B-10WD and AMS1117-3.3. By type, the board carries 36 capacitors, 27 resistors, 12 ICs, 10 connectors, 6 diodes and 2 transistors.
From the project
A small rust-embedded flight computer. RTIC, FrSky protocols, and STM32F4 hardware.
V1 is manufactured by JLCPCB. The final project files (including JLCPCB Part Numbers / Bill of Materials) is in the v1/production folder. Images:

Main components on the Ollyfc
Ollyfc bill of materials (BOM)
101 components, 43 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F401RCTX STM32F401RCTx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | BMP388 | SENSORM-SMD_BMP388 | U2 |
| 1 | BMI088 | LGA-16_L4.5-W3.0-P0.50-BL | U3 |
| 1 | GT-USB-7010ASV | USB-C-SMD_G-SWITCH_GT-USB-7010ASV | U4 |
| 1 | NPA-730B-10WD | SOIC-14W_7.5x9mm_P1.27mm | U5 |
| 1 | AMS1117-3.3 | SOT-223 | U6 |
| 1 | TPS2113ADRBR | VSON-8-1EP_3x3mm_P0.65mm_EP1.65x2.4mm | U7 |
| 1 | PCA9685PW | TSSOP-28_4.4x9.7mm_P0.65mm | U8 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U9 |
| 1 | HDC1080 | Texas_PWSON-N6 | U10 |
| 1 | LIS3MDL | LGA-12_2x2mm_P0.5mm | U11 |
| 1 | NEO-M8N | ublox_NEO | U12 |
| 2 | MMBT3904 | SOT-23 | Q2, Q3 |
| 1 | X322512MSB4SI | OSC-SMD_4P-L3.2-W2.5-BL | X1 |
| 1 | Q13FC1350000400 | FC-135R_L3.2-W1.5 | X2 |
| 1 | 20021521-00010T1LF | IDC-SMD_10P-P1.27_X1270WVS-2X05B-6TV01 | CN1 |
| 1 | C495540 BM06B-SRSS-TBT(LF)(SN) | CONN-SMD_BM06B-SRSS-TBT-LF-SN | CN2 |
| 1 | CONN_01X02 Conn_01x02 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 3 | CONN_01X09 Conn_01x09 | PinHeader_1x08_P2.54mm_Vertical | J2, J3, J4 |
| 1 | DNP GNSS_RF | SMA-TH_KH-SMA-KE-Z | J5 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CONN_01X06 Conn_01x06 | JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J6, J7 |
| 1 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | 2998 | BH-25C-1_ADM | BT1 |
| 1 | 102-CPT-3075-90T 102-CPT-3075-90T-ND | XDCR_CPT-3075-90T | BZ1 |
| 2 | DNP SW_RST | SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SW1, SW2 |
| 2 | C72038 19-213/Y2C-CQ2R2L/3T(CY) | LED_0603_1608Metric | D1, D7 |
| 3 | KT-0603R | LED_0603_1608Metric | D2, D4, D6 |
| 1 | SRV05-4_C7420376 | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL-1 | D3 |
| 1 | GZ1608D601TF | L_0603_1608Metric | FB1 |
| 1 | 27NH 27nH | L_0805_2012Metric | L1 |
| 26 | 100N 100n | C_0402_1005Metric | C1, C2, C3, C4, C5, C8, C9, C11 +18 |
| 2 | 10P 10p | C_0402_1005Metric | C6, C7 |
| 3 | 4.7U 4.7u | C_0402_1005Metric | C10, C21, C33 |
| 2 | 4.7U 4.7u | C_0603_1608Metric | C17, C18 |
| 2 | 33P 33p | C_0402_1005Metric | C25, C26 |
| 1 | 10N 10n | C_0402_1005Metric | C34 |
| 12 | 5.1K | R_0402_1005Metric | R1, R2, R3, R4, R6, R12, R13, R14 +4 |
| 5 | 150 | R_0603_1608Metric | R5, R9, R24, R26, R27 |
| 4 | 1.5K | R_0402_1005Metric | R7, R8, R18, R19 |
| 3 | 1K | R_0402_1005Metric | R10, R11, R21 |
| 1 | 3K | R_0603_1608Metric | R20 |
| 1 | 10 | R_0603_1608Metric | R22 |
| 1 | 7.5K | R_0603_1608Metric | R23 |
Ollyfc design files
The KiCad project lives in the rland93/ollyfc repository on GitHub; these links point at the commit this page was built from.
Ollyfc: common questions
What microcontroller does the Ollyfc use?
The Ollyfc is built around the STM32F401RCTX, from the STM32 family.
How big is the Ollyfc PCB?
The Ollyfc measures 45 × 98 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Ollyfc?
101 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ollyfc design files?
From the rland93/ollyfc repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ollyfc design in my own project?
Yes, under the terms of its MPL-2.0 license, which rland93 chose for the repository.
Can I test firmware for the Ollyfc without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k