HardLabs

SAIF PATEL NovaIoT EmbeddedAssignment

saifpatel044-stack·SAIF_PATEL_NovaIoT_EmbeddedAssignment·hardware/fleetintern.kicad_sch

This repository ships a schematic but no board layout.

About the SAIF PATEL NovaIoT EmbeddedAssignment PCB

SAIF PATEL NovaIoT EmbeddedAssignment is an open source ESP32 PCB design by saifpatel044-stack, published on GitHub. It is a board, with 48 components from 33 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the SHT31-DIS, DS3231M, MPU-6050, TP4056-42-ESOP8 and AMS1117-3.3. By type, the board carries 15 resistors, 10 capacitors, 8 ICs, 4 connectors, 4 diodes and 2 transistors.

It belongs with the power & battery, sensors and rf & radio designs in this gallery.

From the project

ESP32-based hardware for fleet/asset tracking and security monitoring — IMU, temperature & humidity sensing, RTC, GPS, door-intrusion detection, and local LED/buzzer alerting, with onboard Li-ion battery charging and protection.

ESP32-based hardware for fleet/asset tracking and security monitoring — IMU, temperature & humidity sensing, RTC, GPS, door-intrusion detection, and local LED/buzzer alerting, with onboard Li-ion battery charging and protection.

FleetGuard combines a 6-axis IMU, temperature/humidity sensor, real-time clock, GPS module, door-intrusion (reed switch) sensing, and audible/visual alerting, all built around an ESP32-WROOM-32 module with an onboard single-cell Li-ion battery charging and protection subsystem.

Main components on the SAIF PATEL NovaIoT EmbeddedAssignment

ESP32-WROOM-32SHT31-DISDS3231MMPU-6050TP4056-42-ESOP8AMS1117-3.3DW01ANEO-M8M

SAIF PATEL NovaIoT EmbeddedAssignment bill of materials (BOM)

48 components, 33 distinct parts.

QtyPartRefs
1
ESP32-WROOM-32
U1
1
SHT31-DIS
U2
1
DS3231M
U3
1
MPU-6050
U4
1
TP4056-42-ESOP8
U5
1
AMS1117-3.3
U6
1
DW01A
U7
1
NEO-M8M
U8
1
Q_Dual_NMOS_PMOS_G1S2G2D2S1D1
Q1
1
2N2219
Q2
1
Jack-DC
J1
2
Conn_01x04
J2, J4
1
Conn_01x06
J3
1
Battery
BT1
1
Buzzer
BZ1
1
Fuse
F1
1
SW_SPDT_XKB_DMx-xxxx-1
SW2
1
SW_DPST_x2
SW3
1
D_TVS
D1
1
LED YELLOW
D2
Show 13 more
QtyPartRefs
1
LED GREEN
D3
1
LED RED
D4
1
10 microF16V
C1
1
10microF 16V
C2
1
C
C3
7
100nF
C4, C5, C6, C7, C8, C9, C10
3
220R
R1, R5, R6
3
10K
R2, R8, R13
3
R
R7, R9, R10
2
4.7K
R11, R12
1
2K
R14
2
100K
R15, R16
1
1K
R17

SAIF PATEL NovaIoT EmbeddedAssignment design files

The KiCad project lives in the saifpatel044-stack/SAIF_PATEL_NovaIoT_EmbeddedAssignment repository on GitHub; these links point at the commit this page was built from.

SAIF PATEL NovaIoT EmbeddedAssignment: common questions

What microcontroller does the SAIF PATEL NovaIoT EmbeddedAssignment use?

The SAIF PATEL NovaIoT EmbeddedAssignment is built around the ESP32-WROOM-32, from the ESP32 family.

How many components are on the SAIF PATEL NovaIoT EmbeddedAssignment?

48 components, from 33 distinct parts. The full bill of materials is listed on this page.

Where can I download the SAIF PATEL NovaIoT EmbeddedAssignment design files?

From the saifpatel044-stack/SAIF_PATEL_NovaIoT_EmbeddedAssignment repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the SAIF PATEL NovaIoT EmbeddedAssignment design in my own project?

The repository has no license, so all rights stay with saifpatel044-stack. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SAIF PATEL NovaIoT EmbeddedAssignment without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards