SmartKnob DevKit Base
SeedLabs-it·smartknob-hardware·electronics/view_base/view_base.kicad_pcb
About the SmartKnob DevKit Base PCB
SmartKnob DevKit Base is an open source ESP32 PCB design by SeedLabs-it, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 81.2 × 81.2 mm, with 222 components from 38 distinct parts.
Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. Other key parts include the SN74LV1T34DBV, MT6701-CT, VEML7700, AMS1117-3.3 and USBLC6-2SC6. By type, the board carries 95 capacitors, 72 diodes, 28 resistors, 10 ICs, 6 connectors and 3 transistors.
From the project
PCB and CAD files for smartknob devkit
Main components on the SmartKnob DevKit Base
SmartKnob DevKit Base bill of materials (BOM)
222 components, 38 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74LV1T34DBV | SOT-23-5 | U1 |
| 1 | MT6701-CT | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | VEML7700 | VEML7700-TOP | U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2_GndOutIn | U4 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U5 |
| 1 | HX711 | SOIC-16_3.9x9.9mm_P1.27mm | U6 |
| 1 | TMC6300 | QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm_ThermalVias_LargerViaHoles | U8 |
| 1 | VL53L0CXV0DH/1 VL53L0CXV0DH_1 | LGA12_1 | U9 |
| 1 | LP5907MFX-2.8 | SOT-23-5 | U10 |
| 1 | ESP32-S3-WROOM-1U-N16R8 | XCVR_ESP32-S3-WROOM-1U-N16R8 | U11 |
| 1 | 2N7002 MMBT4403 | SOT-23 | Q1 |
| 2 | BSS138 | SOT-23 | Q2, Q3 |
| 1 | USB_C_Receptacle_USB2.0 | USB4510_NoPaste | J1 |
| 1 | 59453-081110EDHLF | Amphenol FCI FPC 8 pin 0.5 pitch | J5 |
| 1 | BLDC | 532610371 | J6 |
| 3 | SM04B-SRSS-TB(LF)(SN) | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J7, J8, J9 |
| 1 | RST | SW_SPST_PTS810 | SW1 |
| 1 | Boot | SW_SPST_PTS810 | SW2 |
| 3 | RotorScrew (BOM-only) | bom_only_no_pin | Z2, Z4, Z6 |
| 1 | WatchGlass39.5mm | bom_only_no_pin | Z3 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BLDCMotor | bom_only_no_pin | Z5 |
| 72 | SK6805 | LED_SK6812_EC15_1.5x1.5mm | D1, D2, D3, D4, D5, D6, D7, D8 +64 |
| 1 | 3.3uH | L_0805_2012Metric | L1 |
| 1 | 22UF 10uF | C_0805_2012Metric | C1 |
| 1 | 0.1UF 0.1uF | C_0603_1608Metric | C2 |
| 12 | 0.1uF | C_0603_1608Metric | C3, C5, C43, C45, C55, C56, C87, C88 +4 |
| 5 | 10uF | C_0805_2012Metric | C4, C33, C44, C75, C90 |
| 72 | 0.1uF | C_0402_1005Metric | C6, C7, C8, C9, C10, C11, C12, C13 +64 |
| 1 | 1uF | C_0603_1608Metric | C76 |
| 1 | 22uF | C_0805_2012Metric | C86 |
| 2 | 10uF | C_0603_1608Metric | C93, C94 |
| 1 | 10K 5.1k | R_0603_1608Metric | R1 |
| 1 | 22R 5.1k | R_0603_1608Metric | R2 |
| 4 | 330 | R_2512_6332Metric | R3, R4, R6, R7 |
| 4 | 2.2k | R_0603_1608Metric | R5, R8, R9, R10 |
| 2 | 100 | R_0603_1608Metric | R11, R12 |
| 15 | 10k | R_0603_1608Metric | R13, R15, R16, R17, R18, R19, R20, R21 +7 |
| 1 | 8.2k | R_0603_1608Metric | R14 |
SmartKnob DevKit Base design files
The KiCad project lives in the SeedLabs-it/smartknob-hardware repository on GitHub; these links point at the commit this page was built from.
SmartKnob DevKit Base: common questions
What microcontroller does the SmartKnob DevKit Base use?
The SmartKnob DevKit Base is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.
How big is the SmartKnob DevKit Base PCB?
The SmartKnob DevKit Base measures 81.2 × 81.2 mm, has 4 copper layers and is 1.2 mm thick.
How many components are on the SmartKnob DevKit Base?
222 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SmartKnob DevKit Base design files?
From the SeedLabs-it/smartknob-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SmartKnob DevKit Base design in my own project?
Yes, under the terms of its Apache-2.0 license, which SeedLabs-it chose for the repository.
Can I test firmware for the SmartKnob DevKit Base without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in smartknob-hardware
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k