23 open source boards using the TMC6300
Real designs built with the TMC6300, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kESP32
SmartKnob DevKit Base
SeedLabs-it
81.2 × 81.2 mm222 parts4LApache-2.047View base
Pytonballoon810
81.2 × 81.2 mm81 parts2LApache-2.02STM32
FOC Control Boards
coopjz
81 × 80.9 mm106 parts4LMIT1View base
Qtejada
81.2 × 81.2 mm81 parts2LApache-2.00View base
Konn1nn
81.2 × 81.2 mm81 parts2LMIT0View base
LeoCheung0804
81.2 × 81.2 mm81 parts2LApache-2.00View base
Liesegang
81.2 × 81.2 mm81 parts2LApache-2.00View base
Moonlight17
81.2 × 81.2 mm81 parts2LApache-2.00View base
toastedcrumpets
81.2 × 81.2 mm81 parts2LApache-2.00View base
Tr-T59
81.2 × 81.2 mm81 parts2LApache-2.00View base
DxnnySch
81.2 × 81.2 mm81 parts2LApache-2.00View base
camerakang
81.2 × 81.2 mm81 parts2LApache-2.00View base
chris-hemmings
81.2 × 81.2 mm81 parts2LApache-2.00View base
knurtz
81.2 × 81.2 mm78 parts2LApache-2.00View base
zhxtl
81.2 × 81.2 mm76 parts2LApache-2.00View base
jujucheck
81.2 × 81.2 mm76 parts2LApache-2.00View base
jujucheck
81.2 × 81.2 mm76 parts2LApache-2.00View base
rfernini
81.2 × 81.2 mm76 parts2LApache-2.00View base
SquaredPotato
81.2 × 81.2 mm76 parts2LApache-2.00View base
Ambition-muzi
81.2 × 81.2 mm76 parts2LApache-2.00Bmacro Dial
KipJM
50 × 50 mm25 parts2LCERN-OHL-W-2.027View base
PROJECT-BIRO
81.2 × 81.2 mm81 parts2LMIT1
How designs wire the TMC6300
Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the TMC6300 connects to, and the resistors, capacitors and other passives placed on it.
- The VCP pin has a capacitor to the supply on 23 of 23 designs, most often 100 nF.
- The VIO/STDBY pin has a decoupling capacitor on 23 of 23 designs, most often 100 nF.
- The 1V8OUT pin has a capacitor to GND on 23 of 23 designs, most often 100 nF.
- The UH pin has a resistor to GND on 22 of 23 designs, most often 10 kΩ (then 100 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCPpin 2 | Connected to: Signal 100% |
|
| UHpin 3 | Connected to: T-Micro32_Plus 83% |
|
| VHpin 4 | Connected to: T-Micro32_Plus 83% |
|
| WHpin 5 | Connected to: T-Micro32_Plus 83% |
|
| ULpin 6 | Connected to: T-Micro32_Plus 83% |
|
| WLpin 7 | Connected to: T-Micro32_Plus 83% |
|
| GNDpin 8, 9, 14 | Connected to: GND 100% | — |
| VLpin 10 | Connected to: T-Micro32_Plus 83% |
|
| VIO/STDBYpin 11 | Connected to: 3.3V 96% |
|
| 1V8OUTpin 13 | Connected to: Signal 100% |
|
| BRUVpin 16 | Connected to: GND 100% | — |
| VSpin 18 | Connected to: 5V 100% |
|
| NCpin 19 | Connected to: Not connected 100% | — |
| BRWpin 20 | Connected to: GND 100% | — |
| PADpin PAD | Connected to: GND 100% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include View base by scottbez1, SmartKnob DevKit Base by SeedLabs-it, Bmacro Dial by KipJM and View base by Pytonballoon810.
The TMC6300 in open source designs
The gallery holds 23 open source boards using the TMC6300 from 23 GitHub repositories; a typical one measures about 81.2 × 81.2 mm and carries around 81 components.
91% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is View base by scottbez1.
Parts used alongside the TMC6300
What boards using the TMC6300 are built for
TMC6300: common questions
Where can I find a TMC6300 reference design?
Each of the 23 boards on this page is a real design using the TMC6300. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TMC6300 VCP pin connected?
The VCP pin has a capacitor to the supply on 23 of 23 designs, most often 100 nF. Counted from the KiCad layouts of 23 open source designs using the TMC6300.
What decoupling capacitors do designs use on the TMC6300 VIO/STDBY pin?
The VIO/STDBY pin has a decoupling capacitor on 23 of 23 designs, most often 100 nF. Counted from the KiCad layouts of 23 open source designs using the TMC6300.
How is the TMC6300 1V8OUT pin connected?
The 1V8OUT pin has a capacitor to GND on 23 of 23 designs, most often 100 nF. Counted from the KiCad layouts of 23 open source designs using the TMC6300.
What parts are used alongside the TMC6300?
The HX711, MT6701-CT, SN74LV1T34DBV, VEML7700 and AP2114HA-3.3 appear in the most repositories here.
Which microcontrollers do boards using the TMC6300 use?
Most are built on ESP32 (1) and STM32 (1).
How big is a typical board using the TMC6300?
The median is 81.2 × 81.2 mm, and 91% are two-layer designs.
What is the most popular open source board using the TMC6300?
By GitHub stars, View base by scottbez1, with 22,165 stars.
Can I simulate one of these boards using the TMC6300 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.