3 open source boards using the VL53L0CXV0DH/1
Real designs built with the VL53L0CXV0DH/1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
SmartKnob DevKit Base
SeedLabs-it
81.2 × 81.2 mm222 parts4LApache-2.047GroundStudio-VL53L0CX-module
GroundStudio
21 × 18 mm15 parts2LNo license0AVR/Arduino
FlySensei Stack RPi
denjos007
90 × 65 mm45 parts4LNo license0
The VL53L0CXV0DH/1 in open source designs
The gallery holds 3 open source boards using the VL53L0CXV0DH/1 from 3 GitHub repositories; a typical one measures about 81.2 × 65 mm and carries around 45 components.
67% use four copper layers or more, and 33% carry an open source license.
The most starred is SmartKnob DevKit Base by SeedLabs-it.
Microcontrollers on boards using the VL53L0CXV0DH/1
VL53L0CXV0DH/1: common questions
Where can I find a VL53L0CXV0DH/1 reference design?
Each of the 3 boards on this page is a real design using the VL53L0CXV0DH/1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the VL53L0CXV0DH/1 use?
Most are built on AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the VL53L0CXV0DH/1?
The median is 81.2 × 65 mm, and 33% are two-layer designs.
What is the most popular open source board using the VL53L0CXV0DH/1?
By GitHub stars, SmartKnob DevKit Base by SeedLabs-it, with 47 stars.
Can I simulate one of these boards using the VL53L0CXV0DH/1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.