23 open source boards using the MT6701-CT
Real designs built with the MT6701-CT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kESP32
SmartKnob DevKit Base
SeedLabs-it
81.2 × 81.2 mm222 parts4LApache-2.047View base
Pytonballoon810
81.2 × 81.2 mm81 parts2LApache-2.02STM32
FOC Control Boards
coopjz
81 × 80.9 mm106 parts4LMIT1View base
Qtejada
81.2 × 81.2 mm81 parts2LApache-2.00View base
Konn1nn
81.2 × 81.2 mm81 parts2LMIT0View base
LeoCheung0804
81.2 × 81.2 mm81 parts2LApache-2.00View base
Liesegang
81.2 × 81.2 mm81 parts2LApache-2.00View base
Moonlight17
81.2 × 81.2 mm81 parts2LApache-2.00View base
toastedcrumpets
81.2 × 81.2 mm81 parts2LApache-2.00View base
camerakang
81.2 × 81.2 mm81 parts2LApache-2.00View base
chris-hemmings
81.2 × 81.2 mm81 parts2LApache-2.00View base
DxnnySch
81.2 × 81.2 mm81 parts2LApache-2.00View base
Tr-T59
81.2 × 81.2 mm81 parts2LApache-2.00View base
knurtz
81.2 × 81.2 mm78 parts2LApache-2.00View base
zhxtl
81.2 × 81.2 mm76 parts2LApache-2.00View base
jujucheck
81.2 × 81.2 mm76 parts2LApache-2.00View base
jujucheck
81.2 × 81.2 mm76 parts2LApache-2.00View base
rfernini
81.2 × 81.2 mm76 parts2LApache-2.00View base
SquaredPotato
81.2 × 81.2 mm76 parts2LApache-2.00View base
Ambition-muzi
81.2 × 81.2 mm76 parts2LApache-2.00View base
PROJECT-BIRO
81.2 × 81.2 mm81 parts2LMIT1Encoder
byrantech
12 × 12 mm7 parts2LMIT4.3k
How designs wire the MT6701-CT
Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the MT6701-CT connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 21 of 23 designs, most often 100 nF.
- The A/U/SDA/DO pin has a pull-up to 3.3V on 21 of 23 designs, most often 2.2 kΩ.
- The B/V/SCL/CLK pin has a pull-up to 3.3V on 21 of 23 designs, most often 2.2 kΩ.
- The MODE pin is tied to 3.3V on 22 of 23 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 96% |
|
| MODEpin 2 | Connected to: 3.3V 96% | — |
| ANALOG/PWMpin 3 | Connected to: Not connected 96% | — |
| GNDpin 4 | Connected to: GND 96% | — |
| PUSHpin 5 | Connected to: Not connected 96% | — |
| A/U/SDA/DOpin 6 | Connected to: T-Micro32_Plus 83% |
|
| B/V/SCL/CLKpin 7 | Connected to: T-Micro32_Plus 83% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include View base by scottbez1, Encoder by byrantech, SmartKnob DevKit Base by SeedLabs-it and View base by Pytonballoon810.
The MT6701-CT in open source designs
The gallery holds 23 open source boards using the MT6701-CT from 23 GitHub repositories; a typical one measures about 81.2 × 81.2 mm and carries around 81 components.
91% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is View base by scottbez1.
Parts used alongside the MT6701-CT
What boards using the MT6701-CT are built for
MT6701-CT: common questions
Where can I find a MT6701-CT reference design?
Each of the 23 boards on this page is a real design using the MT6701-CT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MT6701-CT VDD pin?
The VDD pin has a decoupling capacitor on 21 of 23 designs, most often 100 nF. Counted from the KiCad layouts of 23 open source designs using the MT6701-CT.
What pull-up resistor is used on the MT6701-CT A/U/SDA/DO pin?
The A/U/SDA/DO pin has a pull-up to 3.3V on 21 of 23 designs, most often 2.2 kΩ. Counted from the KiCad layouts of 23 open source designs using the MT6701-CT.
What pull-up resistor is used on the MT6701-CT B/V/SCL/CLK pin?
The B/V/SCL/CLK pin has a pull-up to 3.3V on 21 of 23 designs, most often 2.2 kΩ. Counted from the KiCad layouts of 23 open source designs using the MT6701-CT.
What parts are used alongside the MT6701-CT?
The HX711, SN74LV1T34DBV, TMC6300, VEML7700 and AP2114HA-3.3 appear in the most repositories here.
Which microcontrollers do boards using the MT6701-CT use?
Most are built on ESP32 (1) and STM32 (1).
How big is a typical board using the MT6701-CT?
The median is 81.2 × 81.2 mm, and 91% are two-layer designs.
What is the most popular open source board using the MT6701-CT?
By GitHub stars, View base by scottbez1, with 22,165 stars.
Can I simulate one of these boards using the MT6701-CT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.