Max Main
selina101·CreateLabWork·Goat power PCB/Max_MainPCB/Max_MainPCB.kicad_pcb
About the Max Main PCB
Max Main is an open source ESP32 PCB design by selina101, published on GitHub. It is a 4-layer board measuring 80 × 70 mm, with 29 components from 16 distinct parts.
Its main chip is the SEEEDUINO XIAO ESP32-C3, from the ESP32 family. Other key parts include the INA228AQDGSRQ1 and AP63205WU-7. By type, the board carries 16 connectors, 5 capacitors, 4 ICs, 3 resistors and 1 inductor.
It belongs with the sensors designs in this gallery.
From the project
Repo with projects done during my thesis and the valorisation.
For the PCBs, you will find all the KiCAD files, as well as the gerber files to be able to order PCBs. The file 'PCB library' contains the footprint, the symbols and the 3D models of all the components used for all of the PCBs.
All the components were bought separately and soldered by hand.
For all the Hall sensor PCBs, all the components were bought separately and soldered by hand.

Main components on the Max Main
Max Main bill of materials (BOM)
29 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA228AQDGSRQ1 | INA228 | IC1 |
| 1 | AP63205WU-7 | AP63205WU7 | IC2 |
| 1 | ~ | IMU_V2 | IC3 |
| 1 | SEEEDUINO XIAO ESP32-C3 | Seed Studio XIAO ESP32C3 (with holes) | U1 |
| 2 | ~ | 1x7_Header | J1, J2 |
| 1 | ~ | XT60 | J3 |
| 6 | Screw_Terminal_01x02 | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J5, J8, J10, J12, J14, J15 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_TE_282834-4_1x04_P2.54mm_Horizontal | J6 |
| 1 | ~ | 1x3_FemaleHeader | J7 |
| 5 | Screw_Terminal_01x03 | 1x3_FemaleHeader | J9, J11, J13, J16, J17 |
| 1 | L | CLF12555T-4R7N-H | L1 |
| 2 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C4 |
| 2 | 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3 |
| 1 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 15m | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R3 |
| 2 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6 |
Max Main design files
The KiCad project lives in the selina101/CreateLabWork repository on GitHub; these links point at the commit this page was built from.
Max Main: common questions
What microcontroller does the Max Main use?
The Max Main is built around the SEEEDUINO XIAO ESP32-C3, from the ESP32 family.
How big is the Max Main PCB?
The Max Main measures 80 × 70 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Max Main?
29 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Max Main design files?
From the selina101/CreateLabWork repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Max Main design in my own project?
The repository has no license, so all rights stay with selina101. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Max Main without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in CreateLabWork
NXP
MainPCB V3
selina101
93.1 × 47.3 mm72 parts4LNo license0NXP
Finger FSR V1 main
selina101
57 × 60 mm37 parts2LNo license0Benhui Tongue
selina101
50 × 155 mm28 parts2LNo license0Finger FSR V1 length
selina101
55.3 × 82.3 mm24 parts2LNo license0Index Middle Ring V3
selina101
188.9 × 26.5 mm15 parts2LNo license0IMU6
selina101
10 × 10 mm15 parts2LNo license0IMU V3
selina101
10 × 12 mm12 parts4LNo license0Pinky V1
selina101
157.3 × 26.5 mm11 parts2LNo license0NXP
IMU Main
selina101
52.8 × 33 mm9 parts2LNo license0Thumb V1
selina101
240.6 × 26.5 mm7 parts2LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k