IMU V3
selina101·CreateLabWork·IMU/IMU_V3/IMU_V3/IMU_V3.kicad_pcb
About the IMU V3 PCB
IMU V3 is an open source PCB design by selina101, published on GitHub. It is a 4-layer board measuring 10 × 12 mm, with 12 components from 8 distinct parts.
Other key parts include the LIS3MDLTR and LSM6DSOXTR. By type, the board carries 4 resistors, 3 capacitors, 2 ICs, 2 jumpers and 1 connector.
It belongs with the sensors designs in this gallery.
From the project
Repo with projects done during my thesis and the valorisation.
For the PCBs, you will find all the KiCAD files, as well as the gerber files to be able to order PCBs. The file 'PCB library' contains the footprint, the symbols and the 3D models of all the components used for all of the PCBs.
All the components were bought separately and soldered by hand.
For all the Hall sensor PCBs, all the components were bought separately and soldered by hand.

Main components on the IMU V3
IMU V3 bill of materials (BOM)
12 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LIS3MDLTR | LIS3MDLTR | IC1 |
| 1 | LSM6DSOXTR | LSM6DSOXTR | IC2 |
| 1 | 4_PIN_HEADER 4_pin_header | 4 pin header | J1 |
| 2 | JUMPER_2_OPEN Jumper_2_Open | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2 |
| 2 | 100 nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2 |
| 1 | 1 uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3 |
| 2 | 10K 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2 |
| 2 | 1.9K 1.9k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4 |
IMU V3 design files
The KiCad project lives in the selina101/CreateLabWork repository on GitHub; these links point at the commit this page was built from.
IMU V3: common questions
How big is the IMU V3 PCB?
The IMU V3 measures 10 × 12 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the IMU V3?
12 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IMU V3 design files?
From the selina101/CreateLabWork repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IMU V3 design in my own project?
The repository has no license, so all rights stay with selina101. Use it as a reference, and ask the author before reusing the design.
More boards in CreateLabWork
NXP
MainPCB V3
selina101
93.1 × 47.3 mm72 parts4LNo license0NXP
Finger FSR V1 main
selina101
57 × 60 mm37 parts2LNo license0ESP32
Max Main
selina101
80 × 70 mm29 parts4LNo license0Benhui Tongue
selina101
50 × 155 mm28 parts2LNo license0Finger FSR V1 length
selina101
55.3 × 82.3 mm24 parts2LNo license0Index Middle Ring V3
selina101
188.9 × 26.5 mm15 parts2LNo license0IMU6
selina101
10 × 10 mm15 parts2LNo license0Pinky V1
selina101
157.3 × 26.5 mm11 parts2LNo license0NXP
IMU Main
selina101
52.8 × 33 mm9 parts2LNo license0Thumb V1
selina101
240.6 × 26.5 mm7 parts2LNo license0
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956