Thumb V1

selina101·CreateLabWork·Hands/Hall sensors/PCBs/Thumb_V1/Thumb_V1.kicad_pcb

Thumb V1 PCB layout, top view — open source board by selina101

About the Thumb V1 PCB

Thumb V1 is an open source PCB design by selina101, published on GitHub. It is a 2-layer board measuring 240.6 × 26.5 mm, with 7 components from 3 distinct parts.

Other key parts include the TMAG5273A2QDBVR. By type, the board carries 4 ICs and 3 capacitors.

It belongs with the sensors designs in this gallery.

From the project

Repo with projects done during my thesis and the valorisation.

For each hand, you will need one ThumbV1 FPCB, three IndexMiddleRingV3 FPCB, one PinkyV1 and one MainPCBV3.

The hall sensors exist in three versions (with three different I2C addresses). The correct sensor placement is shown in 'FullHandDiagram.png'.

Thumb V1, from the project README
From the project README

Main components on the Thumb V1

Thumb V1 bill of materials (BOM)

7 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
TMAG5273A2QDBVR
U1, U2, U3
1
~
U8
3
0.1uF
C1, C2, C3

Thumb V1 design files

The KiCad project lives in the selina101/CreateLabWork repository on GitHub; these links point at the commit this page was built from.

Thumb V1: common questions

How big is the Thumb V1 PCB?

The Thumb V1 measures 240.6 × 26.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Thumb V1?

7 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Thumb V1 design files?

From the selina101/CreateLabWork repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Thumb V1 design in my own project?

The repository has no license, so all rights stay with selina101. Use it as a reference, and ask the author before reusing the design.

More boards in CreateLabWork

Similar boards