HardLabs

12V Stripe Controller mini

SmartHome-yourself·shys-collection·templates/hardware/rgbw-led-wifi-controller-12v-smd/kicad/12v_stripe_controller_mini.kicad_pcb

12V Stripe Controller mini PCB layout, top view — open source ESP8266 board by SmartHome-yourself
Simulate this board

About the 12V Stripe Controller mini PCB

12V Stripe Controller mini is an open source ESP8266 PCB design by SmartHome-yourself, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 89.9 × 51.3 mm, with 42 components from 22 distinct parts.

Its main chip is the ESP-12F, from the ESP8266 family. Other key parts include the NCP1117 ST33T3G. By type, the board carries 14 resistors, 10 connectors, 8 diodes, 4 transistors, 3 switches and 2 ICs.

It belongs with the iot & wireless designs in this gallery.

From the project

Die Platine findet Ihr auch bei ELECROW.com unter folgendem Link: https://www.elecrow.com/sharepj/12-v-rgbw-wi-fi-led-controller-for-non-addressable-stripes-812.html

Main components on the 12V Stripe Controller mini

ESP-12FNCP1117 ST33T3G

12V Stripe Controller mini bill of materials (BOM)

42 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP-12F
U1
1
NCP1117 ST33T3G
U2
1
IRLZ34N-Blue
Q1
1
IRLZ34N-Red
Q2
1
IRLZ34N-Green
Q3
1
IRLZ34N-White
Q4
1
12V Input
J1
1
0022232041
SPI
Molex
J2
1
640456-3
TE Connectivity AMP Connectors
J3
1
22-23-2021
3V3 Out
Molex
J4
1
22-23-2021
white
Molex
J5
1
22-23-2021
RX/TX
Molex
J6
1
B5B-XH-A(LF)(SN)
B5B-XH-A_LF__SN_
JST Sales America Inc.
J7
1
22-23-2021
green
Molex
J8
1
22-23-2021
red
Molex
J9
1
22-23-2021
blue
Molex
J10
3
B3F-1000
Omron Electronics Inc-EMC Div
S1, S2, S3
4
1N4007
D1, D2, D3, D4
4
LED
D5, D6, D7, D8
1
100nF
C1
Show 2 more
QtyPartRefs
10
10k
R1, R2, R3, R4, R5, R6, R7, R8 +2
4
10
R11, R12, R13, R14

12V Stripe Controller mini design files

The KiCad project lives in the SmartHome-yourself/shys-collection repository on GitHub; these links point at the commit this page was built from.

12V Stripe Controller mini: common questions

What microcontroller does the 12V Stripe Controller mini use?

The 12V Stripe Controller mini is built around the ESP-12F, from the ESP8266 family.

How big is the 12V Stripe Controller mini PCB?

The 12V Stripe Controller mini measures 89.9 × 51.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 12V Stripe Controller mini?

42 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 12V Stripe Controller mini design files?

From the SmartHome-yourself/shys-collection repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 12V Stripe Controller mini design in my own project?

Yes, under the terms of its GPL-2.0 license, which SmartHome-yourself chose for the repository.

Can I test firmware for the 12V Stripe Controller mini without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in shys-collection

Similar boards