HardLabs

RGB Treppe

SmartHome-yourself·shys-collection·templates/hardware/rgb-led-treppe/kicad/RGB_Treppe.kicad_pcb

RGB Treppe PCB layout, top view — open source ESP8266 board by SmartHome-yourself
Simulate this board

About the RGB Treppe PCB

RGB Treppe is an open source ESP8266 PCB design by SmartHome-yourself, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 72.4 × 74.9 mm, with 16 components from 14 distinct parts.

Its main chip is the NodeMCU1.0(ESP-12E), from the ESP8266 family. By type, the board carries 8 connectors, 4 resistors, 3 diodes and 1 IC.

It belongs with the iot & wireless designs in this gallery.

From the project

Die Platine findet Ihr auch bei ELECROW.com unter folgendem Link: https://www.elecrow.com/sharepj/animated-rgb-led-stairlight-with-esphome-home-assistant-806.html

Die Platine findet Ihr auch bei ELECROW.com unter folgendem Link: https://www.elecrow.com/sharepj/animated-rgb-led-stairlight-with-esphome-home-assistant-806.html

Video zum Update: Stufenweise Animationen: [](https://www.youtube.com/watch?v=RzkHVJpzZmQ)

RGB Treppe, from the project README
From the project README

Main components on the RGB Treppe

NodeMCU1.0(ESP-12E)

RGB Treppe bill of materials (BOM)

16 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NodeMCU1.0(ESP-12E)
U1
1
WS2812B
J1
1
HC-SR501 (oben)
J2
1
HC-SR501 (unten)
J3
1
Photoresistor
J4
1
SPI
J5
1
Screw_Terminal_01x02
J7
1
Power
J8
1
Div. Pins
J9
1
LED PIR oben
D1
1
LED PIR unten
D2
1
LED Photoresistor
D3
1
10K
R1
3
220
R2, R3, R4

RGB Treppe design files

The KiCad project lives in the SmartHome-yourself/shys-collection repository on GitHub; these links point at the commit this page was built from.

RGB Treppe: common questions

What microcontroller does the RGB Treppe use?

The RGB Treppe is built around the NodeMCU1.0(ESP-12E), from the ESP8266 family.

How big is the RGB Treppe PCB?

The RGB Treppe measures 72.4 × 74.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RGB Treppe?

16 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RGB Treppe design files?

From the SmartHome-yourself/shys-collection repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the RGB Treppe design in my own project?

Yes, under the terms of its GPL-2.0 license, which SmartHome-yourself chose for the repository.

Can I test firmware for the RGB Treppe without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in shys-collection

Similar boards