HardLabs

SensorPyramide

SmartHome-yourself·shys-collection·templates/hardware/8in1-sensor/kicad/SensorPyramide.kicad_pcb

SensorPyramide PCB layout, top view — open source ESP8266 board by SmartHome-yourself
Simulate this board

About the SensorPyramide PCB

SensorPyramide is an open source ESP8266 PCB design by SmartHome-yourself, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 49 × 64 mm, with 11 components from 11 distinct parts.

Its main chip is the NodeMCU_1.0_(ESP-12E), from the ESP8266 family. By type, the board carries 8 connectors, 2 resistors and 1 IC.

It belongs with the iot & wireless designs in this gallery.

From the project

Dieses Projekt enthält die Hardware für einen selbstgebauten 8-in-1 Multisensor auf Basis eines NodeMCU v2. Der Sensor lässt sich vollständig lokal über ESPHome betreiben und kann direkt in Home Assistant eingebunden werden. Das Projekt basiert auf der Anleitung auf SmartHomeYour

Dieses Projekt enthält die Hardware für einen selbstgebauten 8-in-1 Multisensor auf Basis eines NodeMCU v2. Der Sensor lässt sich vollständig lokal über ESPHome betreiben und kann direkt in Home Assistant eingebunden werden. Das Projekt basiert auf der Anleitung auf SmartHomeYourself.de: https://www.smarthomeyourself.de/unabhaengige-projekte/arduino-und-esp-projekte/8-in-1-sensor-fuer-home-assistant

Main components on the SensorPyramide

NodeMCU_1.0_(ESP-12E)

SensorPyramide bill of materials (BOM)

11 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NodeMCU_1.0_(ESP-12E)
U1
1
MQ-2
J1
1
V-IN (5V)
J2
1
HC-SR501
J3
1
Lightlevel Sensor
J4
1
Sound-Sensor
J5
1
DHT-22
J6
1
NeoPixel Ring
J7
1
Piezo Beeper
J8
1
100R
R1
1
10K
R2

SensorPyramide design files

The KiCad project lives in the SmartHome-yourself/shys-collection repository on GitHub; these links point at the commit this page was built from.

SensorPyramide: common questions

What microcontroller does the SensorPyramide use?

The SensorPyramide is built around the NodeMCU_1.0_(ESP-12E), from the ESP8266 family.

How big is the SensorPyramide PCB?

The SensorPyramide measures 49 × 64 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SensorPyramide?

11 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SensorPyramide design files?

From the SmartHome-yourself/shys-collection repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the SensorPyramide design in my own project?

Yes, under the terms of its GPL-2.0 license, which SmartHome-yourself chose for the repository.

Can I test firmware for the SensorPyramide without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in shys-collection

Similar boards