3 open source boards using the LC76GABMD

Real designs built with the LC76GABMD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The LC76GABMD in open source designs

The gallery holds 3 open source boards using the LC76GABMD from 3 GitHub repositories; a typical one measures about 52 × 52 mm and carries around 95 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Moto gps rev a1 by mx3353672833-debug.

Microcontrollers on boards using the LC76GABMD

What boards using the LC76GABMD are built for

LC76GABMD: common questions

Where can I find a LC76GABMD reference design?

Each of the 3 boards on this page is a real design using the LC76GABMD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LC76GABMD?

The BQ25628ERYKR, ESP32-S3-WROOM-1U-N16R8, IIS2MDCTR, QMI8658C and SN74LVC1G17DBVR appear in the most repositories here.

Which microcontrollers do boards using the LC76GABMD use?

Most are built on ESP32 (2).

How big is a typical board using the LC76GABMD?

The median is 52 × 52 mm, and 0% are two-layer designs.

What is the most popular open source board using the LC76GABMD?

By GitHub stars, Moto gps rev a1 by mx3353672833-debug, with 320 stars.

Can I simulate one of these boards using the LC76GABMD before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part