Board
SunnyYoshimitsu·ProtoStar_Phone
About the Board
Board is an open source FPGA PCB design by SunnyYoshimitsu, published on GitHub under the CERN-OHL-S-2.0 license. It is a 8-layer board measuring 50.7 × 88.2 mm, with 315 components from 75 distinct parts.
Its main chip is the XC7Z020-CLG484, from the FPGA family. Other key parts include the MT41K256M16TW-107_P, RTL8211F, MPM3834, USB3318 and IS21ES08G. By type, the board carries 151 capacitors, 117 resistors, 17 ICs, 12 connectors, 9 inductors and 3 transistors.
It belongs with the power & battery designs in this gallery.
From the project
- 512Mb DDR3L RAM - 8Gb eMMC - 16Mb Boot Flash
- 512Mb DDR3L RAM - 8Gb eMMC - 16Mb Boot Flash
- 1x Ethernet Gigabit - 1x USB 2.0 High Speed OTG - 1x USB 2.0 Full speed + USB PD (STM32)
- 7x Zynq PS GPIO (3.3V) - 6x Zynq PS GPIO (1.8V) (External SD Card) - 48x Zynq PL differential pairs (1.2-3.3V) - 56x Zynq PL single ended IO (1.2-3.3V) - 8x STM32 GPIO (3.3V)
The repository is structured as follows: - schematics contains the Kicad schematic sheets and schematic pdf - scripts contains a collection of python scripts used during the SoM/Carrier design phase - manufacturing/assembly containts the BOM and pick-and-place position files -…

Main components on the Board
Board bill of materials (BOM)
315 components, 75 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MT41K256M16TW-107_P | BGA96C80P9X16_1400X800X120 | U1 |
| 1 | XC7Z020-CLG484 | CLG484_XIL-L_new | U2 |
| 1 | RTL8211F | RTL8211F-CG_RTK-L | U3 |
| 2 | MPM3834 | MPM3834 | U4, U6 |
| 1 | USB3318 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U5 |
| 1 | IS21ES08G | BGA153N50P14X14_1150X1300X100 | U7 |
| 1 | TPSM82864 | B0QFN_RDJ | U8 |
| 1 | STM32G431CBUX STM32G431CBUx | STM32G431CBU6 | U9 |
| 1 | MPM3822 | QFN_2p5x3p5x1p6_MNP | U10 |
| 1 | W25Q128JVS | WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm | U11 |
| 1 | SRV05-4 | SOT-23-6 | U12 |
| 1 | TPS7A20 | TLV707 | U13 |
| 1 | BMI323 | BMI323_BOS | U14 |
| 1 | TP4056 | TI_SO-PowerPAD-8 | U15 |
| 1 | DW01x | SOT-23-6 | U16 |
| 1 | ~ | CHIP_B02MM_STM | U17 |
| 1 | HSCC8233 | DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm_Dual_MOSFETs | Q1 |
| 1 | NMOS | SOT-23 | Q3 |
| 1 | DMP2104LP | Diodes_DFN1411-3 | Q4 |
| 1 | KC2016Z13.0000C1KX00 ASCO | Oscillator_SMD_Kyocera_4PIN_2.0x1.6mm | X1 |
Show 55 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | KC2016Z25.0000C1KX00 ASE-xxxMHz | Oscillator_SMD_Kyocera_4PIN_2.0x1.6mm | X2 |
| 1 | KC2016Z33.0000C1KX00 CMOS_OSC | Oscillator_SMD_Kyocera_4PIN_2.0x1.6mm | X3 |
| 3 | DF40C-100DS-0.4V_51 | HRS_DF40C-100DS-0.4V_51_ | J1, J2, J3 |
| 1 | Conn_01x14_Pin | TFT-320x240 | J4 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J5 |
| 1 | HDMI_C_1.3 | XKB Connection A71-05H4-111N1 | J6 |
| 2 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J7, J11 |
| 2 | Conn_01x12_Pin | PinSocket_2x06_P2.54mm_Horizontal | J8, J9 |
| 1 | AudioJack3 | Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J10 |
| 1 | Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical | J20 |
| 1 | LED_RED | LED_0603_1608Metric | LED1 |
| 1 | DSK34 | Nexperia_CFP3_SOD-123W | D1 |
| 1 | LED_Small | LED_0603_1608Metric | D2 |
| 1 | 3U3 3u3 | L_0806_2.0x1.6mm | L1 |
| 7 | 120R | L_0402_1005Metric | L2, L3, L4, L6, L7, L8, L9 |
| 1 | 600@100MHz | L_0402_1005Metric | L5 |
| 34 | 4U7 4u7 | C_0402_1005Metric | C1, C7, C8, C9, C10, C11, C12, C15 +26 |
| 14 | 100N 100n | C_0402_1005Metric | C2, C3, C4, C5, C6, C16, C17, C18 +6 |
| 50 | 470N 470n | C_0201_0603Metric | C13, C23, C33, C35, C37, C39, C41, C43 +42 |
| 11 | 47U 47u | C_0805_2012Metric | C24, C27, C28, C29, C31, C49, C73, C74 +3 |
| 3 | 22U 22u | C_0805_2012Metric | C25, C26, C30 |
| 9 | 100U 100u | C_1206_3216Metric | C42, C51, C58, C60, C63, C64, C68, C93 +1 |
| 1 | 10U 10u | C_0402_1005Metric | C65 |
| 15 | 47N 47n | C_0201_0603Metric | C104, C105, C106, C109, C110, C111, C113, C118 +7 |
| 1 | 0.1uF | C_0402_1005Metric | C115 |
| 1 | 10uF | C_0402_1005Metric | C116 |
| 8 | 22nF | C_0402_1005Metric | C117, C140, C143, C144, C145, C146, C147, C148 |
| 2 | 100n | C_0805_2012Metric | C149, C150 |
| 2 | 47u | C_0805_2012Metric | C151, C152 |
| 25 | 10K 10k | R_0402_1005Metric | R1, R5, R6, R13, R15, R39, R40, R41 +17 |
| 30 | 22R | R_0402_1005Metric | R2, R20, R21, R22, R49, R51, R52, R53 +22 |
| 3 | 1K5 1k5 | R_0402_1005Metric | R3, R4, R14 |
| 12 | 4K7 4k7 | R_0402_1005Metric | R7, R8, R9, R10, R11, R12, R17, R18 +4 |
| 1 | 2K49 2k49 | R_0402_1005Metric | R16 |
| 15 | 100K 100k | R_0402_1005Metric | R23, R27, R28, R29, R30, R31, R32, R35 +7 |
| 1 | 8K06 8k06 | R_0402_1005Metric | R24 |
| 1 | 28K7 28k7 | R_0402_1005Metric | R25 |
| 3 | 200K 200k | R_0402_1005Metric | R26, R33, R37 |
| 1 | 44K2 44k2 | R_0402_1005Metric | R34 |
| 1 | 160K 160k | R_0402_1005Metric | R38 |
| 1 | 240R | R_0402_1005Metric | R45 |
| 2 | 100R | R_0201_0603Metric | R46, R47 |
| 1 | 100R | R_0402_1005Metric | R50 |
| 1 | 100K 5k1 | R_0402_1005Metric | R80 |
| 1 | 100K 12k | R_0402_1005Metric | R81 |
| 1 | 330 | R_0402_1005Metric | R91 |
| 1 | 1M | R_0402_1005Metric | R101 |
| 2 | 5.1K | R_0402_1005Metric | R102, R103 |
| 2 | 100K | R_0402_1005Metric | R104, R108 |
| 2 | 10K | R_0402_1005Metric | R105, R110 |
| 2 | 1K | R_0402_1005Metric | R106, R111 |
| 1 | 470 | R_0402_1005Metric | R107 |
| 1 | 2.4K | R_0402_1005Metric | R109 |
| 4 | 220 | R_0402_1005Metric | R112, R113, R114, R115 |
| 2 | 1.8k | R_0402_1005Metric | R116, R117 |
Board design files
The KiCad project lives in the SunnyYoshimitsu/ProtoStar_Phone repository on GitHub; these links point at the commit this page was built from.
- LayoutZynq_SoM.kicad_pcb
- SchematicZynq_SoM.kicad_sch
- BOMmanufacturing/assembly/BOM.csv
Board: common questions
What microcontroller does the Board use?
The Board is built around the XC7Z020-CLG484, from the FPGA family.
How big is the Board?
The Board measures 50.7 × 88.2 mm, has 8 copper layers and is 1.2396 mm thick.
How many components are on the Board?
315 components, from 75 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Board design files?
From the SunnyYoshimitsu/ProtoStar_Phone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Board design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which SunnyYoshimitsu chose for the repository.
Can I test firmware for the Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
More boards in ProtoStar_Phone
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765