3 open source boards using the DW01x

Real designs built with the DW01x, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The DW01x in open source designs

The gallery holds 3 open source boards using the DW01x from 3 GitHub repositories; a typical one measures about 65 × 41.5 mm and carries around 315 components.

67% use four copper layers or more, and 67% carry an open source license.

The most starred is Sonatino by luminationlabs.

Parts used alongside the DW01x

Microcontrollers on boards using the DW01x

DW01x: common questions

Where can I find a DW01x reference design?

Each of the 3 boards on this page is a real design using the DW01x. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the DW01x use?

Most are built on ESP32 (2) and FPGA (1).

How big is a typical board using the DW01x?

The median is 65 × 41.5 mm, and 33% are two-layer designs.

What is the most popular open source board using the DW01x?

By GitHub stars, Sonatino by luminationlabs, with 39 stars.

Can I simulate one of these boards using the DW01x before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part