4 open source boards using the TPS7A20
Real designs built with the TPS7A20, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Air quality sensor
roepkefeller
50.8 × 45 mm75 parts4LNo license59FPGA
Board
pinguz97
50 × 42 mm267 parts8LCERN-OHL-S-2.051FPGA
Board
SunnyYoshimitsu
50.7 × 88.2 mm315 parts8LCERN-OHL-S-2.00FPGA
Board
MAHESH-THILAK-K
50 × 42 mm267 parts8LApache-2.00
The TPS7A20 in open source designs
The gallery holds 4 open source boards using the TPS7A20 from 4 GitHub repositories; a typical one measures about 50.4 × 43.5 mm and carries around 267 components.
100% use four copper layers or more, and 75% carry an open source license.
The most starred is Air quality sensor by roepkefeller.
Parts used alongside the TPS7A20
What boards using the TPS7A20 are built for
TPS7A20: common questions
Where can I find a TPS7A20 reference design?
Each of the 4 boards on this page is a real design using the TPS7A20. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPS7A20?
The BMI323, IS21ES08G, MPM3822, MPM3834 and MT41K256M16TW-107_P appear in the most repositories here.
Which microcontrollers do boards using the TPS7A20 use?
Most are built on FPGA (3) and ESP32 (1).
How big is a typical board using the TPS7A20?
The median is 50.4 × 43.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the TPS7A20?
By GitHub stars, Air quality sensor by roepkefeller, with 59 stars.
Can I simulate one of these boards using the TPS7A20 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.