3 open source boards using the XC7Z020-CLG484
Real designs built with the XC7Z020-CLG484, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Board
pinguz97
50 × 42 mm267 parts8LCERN-OHL-S-2.051FPGA
Board
SunnyYoshimitsu
50.7 × 88.2 mm315 parts8LCERN-OHL-S-2.00FPGA
Board
MAHESH-THILAK-K
50 × 42 mm267 parts8LApache-2.00
The XC7Z020-CLG484 in open source designs
The gallery holds 3 open source boards using the XC7Z020-CLG484 from 3 GitHub repositories; a typical one measures about 50 × 42 mm and carries around 267 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Board by pinguz97.
Parts used alongside the XC7Z020-CLG484
Microcontrollers on boards using the XC7Z020-CLG484
What boards using the XC7Z020-CLG484 are built for
XC7Z020-CLG484: common questions
Where can I find a XC7Z020-CLG484 reference design?
Each of the 3 boards on this page is a real design using the XC7Z020-CLG484. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the XC7Z020-CLG484?
The BMI323, IS21ES08G, MPM3822, MPM3834 and MT41K256M16TW-107_P appear in the most repositories here.
Which microcontrollers do boards using the XC7Z020-CLG484 use?
Most are built on FPGA (3).
How big is a typical board using the XC7Z020-CLG484?
The median is 50 × 42 mm, and 0% are two-layer designs.
What is the most popular open source board using the XC7Z020-CLG484?
By GitHub stars, Board by pinguz97, with 51 stars.
Can I simulate one of these boards using the XC7Z020-CLG484 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.