3 open source boards using the RTL8211F
Real designs built with the RTL8211F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Board
pinguz97
50 × 42 mm267 parts8LCERN-OHL-S-2.051FPGA
Board
SunnyYoshimitsu
50.7 × 88.2 mm315 parts8LCERN-OHL-S-2.00FPGA
Board
MAHESH-THILAK-K
50 × 42 mm267 parts8LApache-2.00
The RTL8211F in open source designs
The gallery holds 3 open source boards using the RTL8211F from 3 GitHub repositories; a typical one measures about 50 × 42 mm and carries around 267 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Board by pinguz97.
Parts used alongside the RTL8211F
Microcontrollers on boards using the RTL8211F
What boards using the RTL8211F are built for
RTL8211F: common questions
Where can I find a RTL8211F reference design?
Each of the 3 boards on this page is a real design using the RTL8211F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the RTL8211F?
The BMI323, IS21ES08G, MPM3822, MPM3834 and MT41K256M16TW-107_P appear in the most repositories here.
Which microcontrollers do boards using the RTL8211F use?
Most are built on FPGA (3).
How big is a typical board using the RTL8211F?
The median is 50 × 42 mm, and 0% are two-layer designs.
What is the most popular open source board using the RTL8211F?
By GitHub stars, Board by pinguz97, with 51 stars.
Can I simulate one of these boards using the RTL8211F before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.