Air-Quality-Sensor

Szymon423·Air-Quality-Sensor·01_Hardware/02_KiCad/air-quality-sensor/air-quality-sensor.kicad_pcb

Air-Quality-Sensor PCB layout, top view — open source ESP32 board by Szymon423

About the Air-Quality-Sensor PCB

Air-Quality-Sensor is an open source ESP32 PCB design by Szymon423, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 70 × 70 mm, with 76 components from 28 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the SHT4X, SCD41-D-R2, TPS54302, USBLC6-2SC6 and SPA06-003. By type, the board carries 33 capacitors, 16 diodes, 11 resistors, 7 ICs, 3 connectors and 3 inductors.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

Open-hardware indoor air quality monitor: ESP32-S3, SCD41 CO₂, SHT4x temp/humidity, SPA06 pressure, WS2812 LED ring. Round PCB in KiCad, 3D-printed enclosure.

A PDF of the schematic is in docs/schematic.pdf.

Main components on the Air-Quality-Sensor

Air-Quality-Sensor bill of materials (BOM)

76 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SHT4X
SHT4x
U1
1
SCD41-D-R2
U2
1
TPS54302
U4
1
USBLC6-2SC6
U5
1
SPA06-003
U6
1
74AHCT1G125
U7
1
ESP32-S3-WROOM-1
U8
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x03
J2
1
Conn_01x04
J3
2
C561579
1A
F2, F3
1
C72443
SW_SPST
SW1
16
WS2812C-2020
D4, D5, D6, D7, D8, D9, D10, D11 +8
1
10U
10u
L1
2
C14709
L_Ferrite
L2, L3
25
100N
100n
C1, C9, C10, C11, C12, C14, C27, C28 +17
1
82P
82p
C2
1
4.7U
4.7u
C3
3
47U
47u
C4, C5, C13
3
10U
10u
C6, C7, C8
Show 8 more
QtyPartRefs
1
100K
100k
R1
1
22K
22k
R2
2
5.1K
5.1k
R3, R4
1
10K
10k
R5
2
22R
R6, R7
1
C21189
0R
R13
2
4.7K
4.7k
R14, R15
1
0R
R16

Air-Quality-Sensor design files

The KiCad project lives in the Szymon423/Air-Quality-Sensor repository on GitHub; these links point at the commit this page was built from.

Air-Quality-Sensor: common questions

What microcontroller does the Air-Quality-Sensor use?

The Air-Quality-Sensor is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Air-Quality-Sensor PCB?

The Air-Quality-Sensor measures 70 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Air-Quality-Sensor?

76 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Air-Quality-Sensor design files?

From the Szymon423/Air-Quality-Sensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Air-Quality-Sensor design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Air-Quality-Sensor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards