2 open source boards using the SPA06-003

Real designs built with the SPA06-003, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The SPA06-003 in open source designs

The gallery holds 2 open source boards using the SPA06-003 from 2 GitHub repositories; a typical one measures about 53 × 53 mm and carries around 71 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Air-Quality-Sensor by Szymon423.

Parts used alongside the SPA06-003

Microcontrollers on boards using the SPA06-003

What boards using the SPA06-003 are built for

SPA06-003: common questions

Where can I find a SPA06-003 reference design?

Each of the 2 boards on this page is a real design using the SPA06-003. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SPA06-003 use?

Most are built on ESP32 (1) and STM32 (1).

How big is a typical board using the SPA06-003?

The median is 53 × 53 mm, and 50% are two-layer designs.

What is the most popular open source board using the SPA06-003?

By GitHub stars, Air-Quality-Sensor by Szymon423, with 0 stars.

Can I simulate one of these boards using the SPA06-003 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part