FPGBA
teejaytiger·FPGBA
About the FPGBA PCB
FPGBA is an open source FPGA PCB design by teejaytiger, published on GitHub. It is a 2-layer board measuring 78.8 × 40 mm, with 65 components from 48 distinct parts.
Its main chip is the XC7S50-L1CSGA324I, from the FPGA family. Other key parts include the IP5306, LM3880, MAX98357A, TPS22917DBV and TLV62569DBV. By type, the board carries 22 capacitors, 16 resistors, 9 ICs, 6 connectors, 3 inductors and 1 speaker.
It belongs with the audio designs in this gallery.
From the project
Full overhaul of the GBA mainboard to free ourselves from supply chain death
Still in the early stages! Check back for more later!

Main components on the FPGBA
FPGBA bill of materials (BOM)
65 components, 48 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IP5306 | SOIC127P600X165-9N | IC1 |
| 1 | XC7S50-L1CSGA324I | BGA-324_15x15mm_Layout18x18_P0.8mm | IC6 |
| 1 | LM3880 | SOT-23-6 | U1 |
| 1 | MAX98357A | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U2 |
| 1 | TPS22917DBV | SOT-23-6 | U3 |
| 1 | TLV62569DBV | SOT-23-5 | U4 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U5 |
| 1 | TLV75518PDBV | SOT-23-5 | U6 |
| 1 | TPS62822DLC | Texas_VSON-HR-8_1.5x2mm_P0.5mm | U7 |
| 1 | 2479774-2 | 24797742 | J1 |
| 1 | Conn_01x06_Pin | Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J3 |
| 1 | Left Daughter Connector | Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J4 |
| 1 | Right Daughter Connector | Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J5 |
| 1 | CART | AGB Cart Pin | J6 |
| 1 | Screen zif FFC/FPC | Hirose_FH12-32S-0.5SH_1x32-1MP_P0.50mm_Horizontal | J9 |
| 1 | Speaker | PinHeader_2x01_P2.00mm_Vertical | LS1 |
| 1 | POW | SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW1 |
| 1 | SELECT | AGB ST SL | SWP2 |
| 1 | START | AGB ST SL | SWP3 |
| 1 | RIGHT | ABG DPAD | SWP4 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LEFT | ABG DPAD | SWP5 |
| 1 | UP | ABG DPAD | SWP6 |
| 1 | DOWN | ABG DPAD | SWP7 |
| 1 | L | SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SWP9 |
| 2 | 2.2uH | 1206 (metric 2832) | L1, L3 |
| 1 | 1uH | LPS4018 | L2 |
| 3 | 10nF | C_0603_1608Metric | C1, C2, C3 |
| 1 | 10uF | C_0805_2012Metric | C4 |
| 1 | 0.1uF | C_0603_1608Metric | C5 |
| 2 | 100nF | R_0603_1608Metric | C6, C16 |
| 1 | 1nF | R_0603_1608Metric | C7 |
| 2 | 22uF | C_1206_3216Metric | C8, C9 |
| 1 | 10uF | LED_0805_2012Metric | C10 |
| 1 | .1uF | C_0603_1608Metric | C11 |
| 3 | 10uF | C_0603_1608Metric | C12, C17, C22 |
| 2 | 1uF | R_0603_1608Metric | C13, C14 |
| 3 | 100nF | C_0603_1608Metric | C15, C19, C21 |
| 1 | 22uF | C_0603_1608Metric | C18 |
| 1 | 100nF | C_0402_1005Metric | C20 |
| 1 | 33k | R_0603_1608Metric | R1 |
| 5 | 10k | R_0603_1608Metric | R2, R3, R11, R12, R16 |
| 1 | 180k | R_0603_1608Metric | R4 |
| 2 | 5.1k | C_0603_1608Metric | R5, R6 |
| 1 | 150k | R_0603_1608Metric | R7 |
| 1 | 1M | R_0603_1608Metric | R8 |
| 1 | 453k | R_0603_1608Metric | R9 |
| 1 | 100k | R_0603_1608Metric | R10 |
| 3 | 4.7k | R_0603_1608Metric | R13, R14, R15 |
FPGBA design files
The KiCad project lives in the teejaytiger/FPGBA repository on GitHub; these links point at the commit this page was built from.
- LayoutFPGBA.kicad_pcb
- SchematicFPGBA.kicad_sch
FPGBA: common questions
What microcontroller does the FPGBA use?
The FPGBA is built around the XC7S50-L1CSGA324I, from the FPGA family.
How big is the FPGBA PCB?
The FPGBA measures 78.8 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FPGBA?
65 components, from 48 distinct parts. The full bill of materials is listed on this page.
Where can I download the FPGBA design files?
From the teejaytiger/FPGBA repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the FPGBA design in my own project?
The repository has no license, so all rights stay with teejaytiger. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the FPGBA without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
More boards in FPGBA
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765