Mainboard
teejaytiger·FPGBA·Mainboard/_restore_backup_2026-07-22T16-07-43-759/Mainboard.kicad_pcb
About the Mainboard PCB
Mainboard is an open source FPGA PCB design by teejaytiger, published on GitHub. It is a 4-layer board measuring 78.8 × 40 mm, with 55 components from 37 distinct parts.
Its main chip is the XC7S50-L1CSGA324I, from the FPGA family. Other key parts include the IP5306, LM3880, MAX98357A, TPS22917DBV and TLV62569DBV. By type, the board carries 19 capacitors, 17 resistors, 9 ICs, 6 connectors, 3 inductors and 1 speaker.
It belongs with the audio designs in this gallery.
From the project
Full overhaul of the GBA mainboard to free ourselves from supply chain death
Still in the early stages! Check back for more later!

Main components on the Mainboard
Mainboard bill of materials (BOM)
55 components, 37 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IP5306 | SOIC127P600X165-9N | IC1 |
| 1 | XC7S50-L1CSGA324I | BGA-324_15x15mm_Layout18x18_P0.8mm | IC6 |
| 1 | LM3880 | SOT-23-6 | U1 |
| 1 | MAX98357A | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U2 |
| 1 | TPS22917DBV | SOT-23-6 | U3 |
| 1 | TLV62569DBV | SOT-23-5 | U4 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U5 |
| 1 | TLV75518PDBV | SOT-23-5 | U6 |
| 1 | TPS62822DLC | Texas_VSON-HR-8_1.5x2mm_P0.5mm | U7 |
| 1 | 2479774-2 | 24797742 | J1 |
| 1 | Conn_01x06_Pin | Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J3 |
| 1 | Left Daughter Connector | Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J4 |
| 1 | Right Daughter Connector | Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J5 |
| 1 | Cartridge Conn | AGB Cart Pin | J6 |
| 1 | Screen zif FFC/FPC | Hirose_FH12-32S-0.5SH_1x32-1MP_P0.50mm_Horizontal | J9 |
| 1 | Speaker | PinHeader_2x01_P2.00mm_Vertical | LS1 |
| 2 | 2.2uH | 1206 (metric 2832) | L1, L3 |
| 1 | 1uH | LPS4018 | L2 |
| 3 | 100nF | R_0603_1608Metric | C1, C6, C16 |
| 2 | 10uF | LED_0805_2012Metric | C2, C10 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10uF | C_0805_2012Metric | C3, C4 |
| 3 | 1uF | R_0603_1608Metric | C5, C13, C14 |
| 1 | 1nF | R_0603_1608Metric | C7 |
| 2 | 22uF | C_1206_3216Metric | C8, C9 |
| 1 | .1uF | C_0603_1608Metric | C11 |
| 2 | 10uF | C_0603_1608Metric | C12, C17 |
| 2 | 100nF | C_0603_1608Metric | C15, C19 |
| 1 | 22uF | C_0603_1608Metric | C18 |
| 3 | 33k | R_0603_1608Metric | R1, R2, R3 |
| 1 | 180k | R_0603_1608Metric | R4 |
| 2 | 5.1k | C_0603_1608Metric | R5, R6 |
| 1 | 150k | R_0603_1608Metric | R7 |
| 1 | 1M | R_0603_1608Metric | R8 |
| 1 | 453k | R_0603_1608Metric | R9 |
| 2 | 100k | R_0603_1608Metric | R10, R17 |
| 3 | 10k | R_0603_1608Metric | R11, R12, R16 |
| 3 | 4.7k | R_0603_1608Metric | R13, R14, R15 |
Mainboard design files
The KiCad project lives in the teejaytiger/FPGBA repository on GitHub; these links point at the commit this page was built from.
Mainboard: common questions
What microcontroller does the Mainboard use?
The Mainboard is built around the XC7S50-L1CSGA324I, from the FPGA family.
How big is the Mainboard PCB?
The Mainboard measures 78.8 × 40 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Mainboard?
55 components, from 37 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mainboard design files?
From the teejaytiger/FPGBA repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mainboard design in my own project?
The repository has no license, so all rights stay with teejaytiger. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mainboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
More boards in FPGBA
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765