Teacup carrier
About the Teacup carrier PCB
Teacup carrier is an open source ESP32 PCB design by thingino, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 257 × 117.5 mm, with 133 components from 98 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R2, from the ESP32 family. Other key parts include the AZ1117-3.3, AZ1117-1.8, MCP4661-104E_ST, W25Q32JVSS and AZ1117CH-3.3TRG1. By type, the board carries 43 resistors, 28 connectors, 27 capacitors, 15 ICs, 11 jumpers and 3 inductors.
It belongs with the dev boards & breakouts and iot & wireless designs in this gallery.
From the project
Universal Ingenic SoC development platform: one carrier + per-SoC interposer modules (T10 through A1, any package) on a DDR4 card edge, with an ESP32-S3 BMC for autonomous LLM-driven development.
A universal development platform for any Ingenic SoC — T10, T20, T21, T23, T30, T31, T32, T33, T40, T41, and the A1 NVR processor — regardless of package (QFN88 / QFN96 / BGA232 / BGA356 / BGA381).
Two boards: - a carrier — the universal baseboard: adjustable SoC power, all peripherals, full pin breakout, and an on-board ESP32-S3 management controller so an agent (an LLM, CI, or a human) can drive the target wired or wireless — flash, reset, boot-select, console, and voltage-margin it hands-off; - a small per-SoC interposer — the SoC + its package fanout + clock + decoupling + straps (+…
Main components on the Teacup carrier
Teacup carrier bill of materials (BOM)
133 components, 98 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AZ1117-3.3 AP62600SJ-7 | QFN-12_L3.0-W2.0-P0.50-TL_AP62600SJ-7 | U1 |
| 1 | AZ1117-1.8 AP62300WU-7 | TSOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U2 |
| 1 | MCP4661-104E_ST | TSSOP-14_4.4x5mm_P0.65mm | U3 |
| 1 | W25Q32JVSS TPS22990DMLR | WSON-10_L3.0-W2.0-P0.50-BL-EP_TI_DML | U4 |
| 1 | AZ1117CH-3.3TRG1 | SOT-223-3_TabPin2 | U5 |
| 1 | SY8089A1AAC AZ1117CH-1.8TRG1 | SOT-223-3_TabPin2 | U6 |
| 1 | SY8089A1AAC AP62300WU-7 | TSOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U7 |
| 1 | ESP32-S3-WROOM-1-N16R2 | ESP32-S3-WROOM-1 | U8 |
| 2 | TS5A3166 | SOT-23-5 | U9, U10 |
| 1 | DIP-8 Socket | DIP-8_W7.62mm_Socket | U11 |
| 1 | TPS2053BDR | SOIC-16_3.9x9.9mm_P1.27mm | U12 |
| 1 | W25Q32JVSS | SOIC-8_5.3x5.3mm_P1.27mm | U13 |
| 1 | TPS22990DMLR | WSON-10_L3.0-W2.0-P0.50-BL-EP_TI_DML | U14 |
| 1 | TCA9555PWR | TSSOP-24_4.4x7.8mm_P0.65mm | U15 |
| 2 | AO3401A | SOT-23 | Q1, Q2 |
| 1 | AH58893-T9B10-3F | DDR4288S0511H_UDIMM288 | J1 |
| 1 | TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | TE_292303-7 | USB_A_TE_292303-7_Horizontal | J3 |
| 1 | CONN_02X08_ODD_EVEN Hirose_DM3D-SF | microSD_HC_Hirose_DM3D-SF | J4 |
| 1 | Wuerth_694106301002 | BarrelJack_Wuerth_6941xx301002 | J5 |
Show 78 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_02X07_ODD_EVEN AudioJack4_Ground | Jack_3.5mm_PJ320D_Horizontal | J6 |
| 1 | CONN_02X07_ODD_EVEN SFW15R-2STE1LF | FPC-SMD_15P-P1.00_SFW15R-2STE1LF | J7 |
| 1 | SFW15R-2STE1LF | FPC-SMD_15P-P1.00_SFW15R-2STE1LF | J8 |
| 1 | CONN_01X02_MOUNTINGPIN TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J9 |
| 1 | HDR_J20 | PinHeader_2x06_P2.54mm_Vertical | J20 |
| 1 | HDR_J21 | PinHeader_2x06_P2.54mm_Vertical | J21 |
| 1 | HDR_J22 | PinHeader_1x05_P2.54mm_Vertical | J22 |
| 1 | HDR_J23 | PinHeader_1x05_P2.54mm_Vertical | J23 |
| 1 | HDR_J24 | PinHeader_1x05_P2.54mm_Vertical | J24 |
| 1 | HDR_J25 | PinHeader_2x04_P2.54mm_Vertical | J25 |
| 1 | HDR_J26 | PinHeader_1x05_P2.54mm_Vertical | J26 |
| 1 | HDR_J27 | PinHeader_2x05_P2.54mm_Vertical | J27 |
| 1 | HDR_J28 | PinHeader_1x02_P2.54mm_Vertical | J28 |
| 1 | HDR_J29 | PinHeader_1x05_P2.54mm_Vertical | J29 |
| 1 | HDR_J30 | PinHeader_2x09_P2.54mm_Vertical | J30 |
| 1 | HDR_J31 | PinHeader_2x11_P2.54mm_Vertical | J31 |
| 1 | HDR_J32 | PinHeader_2x13_P2.54mm_Vertical | J32 |
| 1 | HDR_J33 | PinHeader_2x13_P2.54mm_Vertical | J33 |
| 1 | HDR_J34 | PinHeader_2x13_P2.54mm_Vertical | J34 |
| 1 | HDR_J35 | PinHeader_2x13_P2.54mm_Vertical | J35 |
| 1 | HDR_J36 | PinHeader_1x03_P2.54mm_Vertical | J36 |
| 1 | HDR_J37 | PinHeader_1x07_P2.54mm_Vertical | J37 |
| 1 | AMP_MIC_TAP | PinHeader_1x03_P2.54mm_Vertical | J38 |
| 1 | 0.8V | PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | 0.9V | PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 1 | 1.0V | PinHeader_1x02_P2.54mm_Vertical | JP4 |
| 1 | 1.1V | PinHeader_1x02_P2.54mm_Vertical | JP5 |
| 2 | COMPUTER | PinHeader_1x02_P2.54mm_Vertical | JP6, JP10 |
| 1 | 1.35V | PinHeader_1x02_P2.54mm_Vertical | JP7 |
| 1 | 1.5V | PinHeader_1x02_P2.54mm_Vertical | JP8 |
| 1 | 1.8V | PinHeader_1x02_P2.54mm_Vertical | JP9 |
| 2 | EN_SEL | PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Left | JP11, JP12 |
| 2 | SSSS711403 | SW-TH_SSSS711403 | SW1, SW2 |
| 2 | PMEG2010ER | Nexperia_CFP3_SOD-123W | D1, D2 |
| 2 | 2.2UH 2.2uH | L_1210_3225Metric | L1, L2 |
| 1 | 2.2uH | L_1210_3225Metric | L3 |
| 2 | 10UF 22uF | C_0805_2012Metric | C1, C10 |
| 2 | 1UF 100nF | C_0402_1005Metric | C2, C17 |
| 2 | 100NF 100nF | C_0402_1005Metric | C3, C12 |
| 1 | 10UF 1uF | C_0402_1005Metric | C4 |
| 1 | 1UF 4.7nF | C_0402_1005Metric | C5 |
| 3 | 100NF 10uF | C_0805_2012Metric | C6, C15, C28 |
| 1 | 10UF 100nF | C_0402_1005Metric | C7 |
| 2 | 100NF 22uF | C_0805_2012Metric | C9, C18 |
| 1 | 1UF 22uF | C_0805_2012Metric | C11 |
| 1 | 10UF 1nF | C_0402_1005Metric | C13 |
| 1 | 1UF 1uF | C_0603_1608Metric | C14 |
| 1 | 10UF 10uF | C_0805_2012Metric | C16 |
| 1 | 100NF 1uF | C_0603_1608Metric | C19 |
| 1 | 12PF 10uF | C_0805_2012Metric | C21 |
| 1 | 4.7UF 100nF | C_0402_1005Metric | C22 |
| 1 | 1nF | C_0402_1005Metric | C23 |
| 3 | 100nF | C_0402_1005Metric | C24, C25, C26 |
| 2 | 10uF | C_0805_2012Metric | C27, C29 |
| 3 | 100k | R_0402_1005Metric | R1, R3, R22 |
| 7 | 10k | R_0402_1005Metric | R2, R7, R8, R9, R10, R11, R14 |
| 1 | 5K1 10k | R_0402_1005Metric | R4 |
| 1 | 5K1 100k | R_0402_1005Metric | R5 |
| 1 | 31.6k | R_0402_1005Metric | R6 |
| 2 | 5.1k | R_0402_1005Metric | R12, R13 |
| 3 | 47K 100k | R_0402_1005Metric | R15, R17, R20 |
| 1 | 47K 4.7k | R_0402_1005Metric | R16 |
| 2 | 47K 5.1k | R_0402_1005Metric | R18, R19 |
| 2 | 1k | R_0402_1005Metric | R21, R23 |
| 1 | 100K 10k | R_0402_1005Metric | R24 |
| 3 | 4.7k | R_0402_1005Metric | R25, R41, R42 |
| 1 | 240R 4.7k | R_0402_1005Metric | R26 |
| 1 | 240R 3.32k | R_0402_1005Metric | R27 |
| 5 | 10.0k | R_0402_1005Metric | R28, R34, R36, R38, R40 |
| 1 | 100K 4.99k | R_0402_1005Metric | R29 |
| 1 | 300K 10.0k | R_0402_1005Metric | R30 |
| 1 | 150K 6.65k | R_0402_1005Metric | R31 |
| 1 | 120K 10.0k | R_0402_1005Metric | R32 |
| 1 | 8.25k | R_0402_1005Metric | R33 |
| 1 | 6.81k | R_0402_1005Metric | R35 |
| 1 | 8.66k | R_0402_1005Metric | R37 |
| 1 | 12.4k | R_0402_1005Metric | R39 |
| 1 | 1M | R_0402_1005Metric | R43 |
Teacup carrier design files
The KiCad project lives in the thingino/teacup-neo repository on GitHub; these links point at the commit this page was built from.
Teacup carrier: common questions
What microcontroller does the Teacup carrier use?
The Teacup carrier is built around the ESP32-S3-WROOM-1-N16R2, from the ESP32 family.
How big is the Teacup carrier PCB?
The Teacup carrier measures 257 × 117.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Teacup carrier?
133 components, from 98 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Teacup carrier design files?
From the thingino/teacup-neo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Teacup carrier design in my own project?
Yes, under the terms of its GPL-3.0 license, which thingino chose for the repository.
Can I test firmware for the Teacup carrier without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in teacup-neo
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k