2 open source boards using the MCP4661-104E_ST

Real designs built with the MCP4661-104E_ST, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The MCP4661-104E_ST in open source designs

The gallery holds 2 open source boards using the MCP4661-104E_ST from 1 GitHub repository; a typical one measures about 257 × 117.5 mm and carries around 132 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Teacup carrier by thingino.

Microcontrollers on boards using the MCP4661-104E_ST

ESP32 2

What boards using the MCP4661-104E_ST are built for

MCP4661-104E_ST: common questions

Where can I find a MCP4661-104E_ST reference design?

Each of the 2 boards on this page is a real design using the MCP4661-104E_ST. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MCP4661-104E_ST use?

Most are built on ESP32 (2).

How big is a typical board using the MCP4661-104E_ST?

The median is 257 × 117.5 mm, and 0% are two-layer designs.

What is the most popular open source board using the MCP4661-104E_ST?

By GitHub stars, Teacup carrier by thingino, with 1 stars.

Can I simulate one of these boards using the MCP4661-104E_ST before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.